Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How much ???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

How much ???

Post by Shorty40 »

What distance should the uni be to the dust cover on a drive shaft ?

Basically how much shaft should be out or showing ?

How much does the shaft move from full droop to full compression ? (I understand all rigs will be different depending on mods - I am just after rough figures :) ) Bearing in mind it is a 40 series, springover, 60 series springs etc.

Is it true that if it is too close it can smash your gearbox on compression ? :?

thanks

Dan
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

The reason I ask is I just had a custom shaft done and it shows all the shaft right up til you can see the splines :shock:

<<------ BTW, you can see the flex in my avator ;)
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

yeah i seen a t-case with a window.
hands and mums dont count!!!
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

if it's a toyota shaft and you can see splines it's too stretched. with that much flex you might need something custom with extra slip length to acommodate your max and min required lengths.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests