Page 1 of 1
Foreigners Allowed?
Posted: Tue Jul 29, 2003 9:10 am
by Toyhatsu
G'Day All,...Mike, Murray, Andy, Besty
Hey do you allow foreigners in on this group? This looks like an excellent place though I haven't quite figured out what I am doing yet.
Posted: Tue Jul 29, 2003 9:21 am
by BundyRumandCoke
Posted: Tue Jul 29, 2003 10:43 am
by murcod
Posted: Tue Jul 29, 2003 12:50 pm
by BundyRumandCoke
Posted: Tue Jul 29, 2003 3:48 pm
by *BESTY*
It's good to finally see you on the board Kent. I expect lots of pics of your Rocky.......as you're the only other person with a SAS on a late model Daihatsu !
WELCOME
Posted: Tue Jul 29, 2003 6:02 pm
by murcod
Ahhh.... so you're the Kent with the solid axle Rocky that I've heard about on the WARFS list!
By the way, of course foreigners are welcome!
It would be good to get some more on here to swap ideas- there are currently only a couple who drop in every now and then.
So have you got any pics of your Rocky Kent? And a list of the mods you've done?
#
Posted: Tue Jul 29, 2003 8:27 pm
by Andy
G-day Kent , It's been awhile , " Welcome " , how's your " Big - Rig " going ??? , got the lockers in yet ???
Posted: Tue Jul 29, 2003 9:16 pm
by rocknferoza
Hey Kent welcome aboard. Good 2 see u have joined our little group on this board
Posted: Wed Jul 30, 2003 10:42 am
by Ferwoaza
KENT!!!!! Of course you are welcome here, cost of adminsion is 1 solid axle swapped Feroza, please ship to me in Australia and I'll send you your membership details for the messageboard
Good to see you found us mate!!!
Posted: Wed Jul 30, 2003 11:21 am
by Toyhatsu
G'Day All,
Thanks for lettin me on board. Bloody yanks...does that mean jerkoffs? Anyhooters I hope that I can contribute something worthwhile and didn't offend anyone with my off color humor. I don't have a list of mods but I do have a new front bumper and a big hole in the fender for a snorkle...first attempt didn't go too well. I did get a Detroit TruTrac installed in the rear. It is a geared limited slip, no clutch plates. Seems to work OK but I haven't tried it on anything difficult yet.
Thanks again for the positive invitation to the group!
Posted: Wed Jul 30, 2003 6:37 pm
by MJHsurfin
G'Day Kent,
Didn't I warn you about this lot ???!!! Well it's too late to escape now - they know where you live !! Handle with extreme care
How's that Stainless welding going ;-) I expect to see a schmick snorkel on that beast before Winter ;-)
Later - Mike H.
Posted: Thu Jul 31, 2003 3:39 pm
by Le0n
Yeah Kent, your welcome.
We need your brain not your body.
Posted: Thu Jul 31, 2003 10:06 pm
by Ferwoaza
Bwahahahaa!!!!! That should be in a sig line somewhere Leon
Posted: Thu Jul 31, 2003 11:05 pm
by manus
welkpom to the board kent
Posted: Fri Aug 01, 2003 5:10 am
by *BESTY*
manus wrote:welkpom to the board kent
Geez Manus....ya gotta learn to spell......or even get the words written down to sound like what it should
Welcome = wellkum = welcum =velcom........you get the idea
Posted: Fri Aug 01, 2003 8:20 am
by murcod
He's just speaking double Dutch! (well he is from Holland)
Posted: Fri Aug 01, 2003 10:47 am
by Toyhatsu
I do listen to Dire Straights a lot and wear a Australia 4X4 Adventure Magazine hat that Mike gave me. An Aussie wanna be. No better people on earth as far as I'm concerned!
The Coast Guard just arrested some Cubans in a `52 Chevy pick up off the coast of Florida, US. They had lashed oil drums to the side and hooked up a prop to the drive shaft. Gave me BIG ideas on how to get to Oz
Murray,
I am trying to get my drawings and stuff together on the adapter plate. I will post it to the group as I need some feedback on the pilot bearing adapter.
Hey Heath...glad to see that you are around.
Manus,
I didn't look at this close and I thought that it said welkporn. Hmmm, I just join a message board and get invited to a members free porno site
Mike,
Thank you for the tips on the snorkle. I should order the mandrel bends next week.
Posted: Tue Aug 19, 2003 5:56 am
by manus
hey who cares you all know what i mean
btw in duch its welkom
:n00b: 
