hey gang, just moved the batteries into the tray of the lux (82 model petrol), and working on wiring in the smart start, now the voltage need sto get up to 13.6V to open the solenoid, yet at the terminal I can only get 13.4V (about .4V drop from output in front), now I really don't wanna re-wire the batts with bigger wire (I did use the correct gauge to start with), so are there any other tricks I could do to boost the voltage at the batts????
will a bigger altenator work?? or should I get redarc to change the on voltage (apparently itr can be done)?? or whats the easiest way?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
help with smart start
Moderator: -Scott-
help with smart start
Is it beer o'clock yet??
A possible easy option depening on how you've set it up would be to have the "smart start" unit located up at the front of the car, but this depends on how you're running the cable to the tray of course; it's only an option if you have a separate cable running to each battery.
Failing that you need the relay to be tripping at a different voltage.
Jason
Failing that you need the relay to be tripping at a different voltage.
Jason
This is not legal advice.
Only way to fix it is run large cable over the longest run.
Also your starter is going to suffer because as soon as the current load goes up your voltage goes down. ie starter is probably 200amp odd during starting (at a guess).
You will probably lose something like 1.5v while trying to start the car depending on what size cable is being used. I'm guessing if you are already losing that much voltage just charging then your cable is not big enough.
Also your starter is going to suffer because as soon as the current load goes up your voltage goes down. ie starter is probably 200amp odd during starting (at a guess).
You will probably lose something like 1.5v while trying to start the car depending on what size cable is being used. I'm guessing if you are already losing that much voltage just charging then your cable is not big enough.
KRiS
Who is online
Users browsing this forum: No registered users and 1 guest