Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cigarette Lighter Socket Ideas?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Cigarette Lighter Socket Ideas?

Post by HotFourOk »

hey guys,

I want to put a cigarette lighter socket in the rear of my Daihatsu Rocky. I am going to run it from the battery so I can have power even when accessories isnt on.

What is the best thing to buy for this?? I have seen the replacement sockets.. but mounting it wouldn't be all the best coz there is no surround.. only the bare socket.

What have you guys done for this? Can you buy a socket with a surround so it's tidy and easy to install? From another car maybe?

Thanks, Nick
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

you need a surface mount socket, you get them at repco or autobahn, maybe auto elecs have them aswell

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

I put one in the back of the hilux for a fridge, but I got one that was just a male to female socket, cut off the male end and wired it to the battery with a fuse and a seperate switch. It's not mounted to anything, just limited by the length of wire.
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

there is a marine plug that screw's the plug connectors together ,it saves the cigerate plug vibrating/shaken loose
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

jessie928 wrote:you need a surface mount socket, you get them at repco or autobahn, maybe auto elecs have them aswell

Jes
That sounds exactly like what I'm after.. mite go for a look cheers

I also thought of that phippsy... just use one of the extension plugs and cut one end off... could be the way to go if i cant get what i'm after.

The car has already got some kind of plug in the back.. i dunno what kind.. might go have a look and find out.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

make sure u fit a fuse to this set up too best fitted close to the battery as well
Posts: 92
Joined: Mon Jan 31, 2005 7:47 pm

socket

Post by Mud_5lut »

i have seen in super sheap,autobarm ect, you can buy the 3 way sockets. they are all enclosed in a plastic box which is roughly like 25x25mm rhs steel but with 3xcigarette plugs in them. i am mounting them just behind the cab for when out spotlighting and shooting you can run more hand held spotlights, definately run a fuse though good luck.
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Yeah i got a fuse block in the engine bay that all my accessories run through...

Even the 3 way ones you said might be the go Mud_5lut.. in case i need more down the track
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 477
Joined: Tue Sep 16, 2003 4:51 pm
Location: Canberra

Re: socket

Post by Slayer »

Mud_5lut wrote:i have seen in super sheap,autobarm ect, you can buy the 3 way sockets. they are all enclosed in a plastic box which is roughly like 25x25mm rhs steel but with 3xcigarette plugs in them. i am mounting them just behind the cab for when out spotlighting and shooting you can run more hand held spotlights, definately run a fuse though good luck.


gee that sounds like bad news... cig lighters and shooting spotlights just dont mix... most of the cheap sockets have a 4 or 5 amp max rating... they get very hot a melt the arse outa the plugs, spotlights are best kept to clamps straight onto the battery, u will also get a much brighter light this way....

best plug i have found is the hella style one.. pay a little more for them, but for high current accesories they are odds on... u can get them at supercheap under the lumen?? and also the nightvision brand.. avalible in male and female versions...
i also chose one of these cause the waeco fridge plug is designed for one...
For sale: extended shackles - custom made, PM for details
$POA
WANTED: hilux crawler transfer gears
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

another good plug for high current is the 'anderson' plug they are grey and come in a variety of sizes right upto huge ones for forklifts, wouldn't be suprised if they come on some fridges, mate has one for plugging his van into his fourby for power.
There are no stupid questions, but there are a LOT of inquisitive idiots
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

HotFour, the plug in the back of yours already, is it like a normal bare socket, but with only 2 pins, one horizontal, and one vertical below it? This is a 2 pin polarised plug. Good for 15 amps. Excellent for 12 V applications. I use them for almost everything, and have an adaptor made up for any ciggy plug things I have, like chargers, ect.
I have also used the small Anderson Plugs for power to a camper. They are good as well, except the + terminal can grow a bit of corrosion if not looked after.
Both these plugs should be available at a good electrical suppliers place like Auslec, or Ideal Electrical.
Mud makes excellent toothpaste.
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

Post by grazza »

I just rigged up more power for the back of mine, inlcuded the standard cigarette socket, the mini-ciggy socket and a secure one for the fridge.

I just bought a Waeco 40AC and it comes with a ciggy plug which may fall out on rough and corrugated tracks, no fun having all your food defrosting and beers warming up.

I chopped it off and looked for a replacement. The Engels have an "ASPAN" connector which is very good and very expensive ($45 from ARB) I looked at the marine plug/sockets and found that the socket is not flush.

Found a great alternative, a Dick Smith Microphone plug and socket, which are keyed, $2.45 ea
Image Image
Posts: 292
Joined: Mon Jan 20, 2003 5:43 pm
Location: Liverpool NSW

Post by Charlie »

Patroler wrote:another good plug for high current is the 'anderson' plug they are grey and come in a variety of sizes right upto huge ones for forklifts, wouldn't be suprised if they come on some fridges, mate has one for plugging his van into his fourby for power.
50 amps are $50 with plaster cover for when not on use,you should get the same on Ebay for less than $20.Well worth the money.
Charlie
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Post by V8 Middy »

Is there some sort of stardard that accessories from 4wd shops use? The "T" plugs look good but can you still buy them?

I'm about to do the same in my truck and figured it would be good to put 1 ciggie lighter socket cos so many things use them, then put a second socket capable of higher current. There is still the dilemma f which one to use.

Also, I'd reccommend using a very high amp (eg 50A) fuse as close to the battery as possible (in case of short circuit) Then run 8ga cable to the back of the vehicle. Then use smaller (say 10 - 15A) fuses for each plug. That way you could run a fridge and a spotlight and maybe something else safely without any voltage drop.
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Posts: 282
Joined: Sun Oct 27, 2002 9:15 pm

Post by BeZeRK »

i dont know the name of it but there is a beter plug to use that we used to install in the 4x4 workshop i worked at.

the male and female end get replaced and its a slightly smaller plug..

it is also used on the waeco batteries next to the normal cig plug..

these can handle more amps.

Use 6mm wire and a 25a circuit breaker. near the battery
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

ive got a waeco cigie lighter extender thingo and just used a rubber doorstop to enclose the ciggy lighter.

to mount it i got an angle bracket and some hose clamps and attached it to the roll bar down near the seatbelt winder.

its good cos you can cap it when not in use.
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

Go to an electrical wholesaler and get some ELV or "T" plugs. Similar to a 240 plug but only 2 pins in a T config. Easy to remember polarity, top of the T is negative, vertical is positive. I've used them for years for my comms gear, fridge, lighting, etc.

They're cheap and easy to connect and mount. I have run more then 20amps through them for extended periods and they NEVER even got warm. I've made up a "powerboard" with a zippy box from tricky dicky with 3 plugs on it so I can run multiple pieces of equipment and if you want, you can even wire up an ammeter....works fantastic. YOU CAN ALSO RUN MUCH LARGER DIAMETER WIRING TO MINIMISE VOLTAGE DROP.

Don't even THINK about ciggie lighter sockets, they just don't handle enough current. 5 amps for an extended time will melt 'em....= fire hazard, particularly in the rear where you can't see it, AND it won't blow your fuses.
You do not have the required permissions to view the files attached to this post.
Last edited by Goatse.AJ on Thu Dec 01, 2005 11:37 pm, edited 1 time in total.
bru21 wrote:What happens in goat, stays in goat!
Posts: 477
Joined: Tue Sep 16, 2003 4:51 pm
Location: Canberra

Post by Slayer »

grazza wrote:I just rigged up more power for the back of mine, inlcuded the standard cigarette socket, the mini-ciggy socket and a secure one for the fridge.

I just bought a Waeco 40AC and it comes with a ciggy plug which may fall out on rough and corrugated tracks, no fun having all your food defrosting and beers warming up.

I chopped it off and looked for a replacement. The Engels have an "ASPAN" connector which is very good and very expensive ($45 from ARB) I looked at the marine plug/sockets and found that the socket is not flush.

Found a great alternative, a Dick Smith Microphone plug and socket, which are keyed, $2.45 ea
Image Image

if u take the red bit off a waeco plug it is designed to fit into the hella style socket.. much more secure...
For sale: extended shackles - custom made, PM for details
$POA
WANTED: hilux crawler transfer gears
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Image
I'm pretty sure the socket I have is the 2nd one in on this pic.. the Hella type socket.
What plugs fit into this.. Eg Waeco etc... and where do I go about getting some male ones to fit in it??
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

Post by grazza »

Supercheap, autobarn, repco, etc, have the hella plugs.
I still reckon they will fall out. Just put the plug in the socket and see what I mean. I would not recommend my Dick Smith solution for spotties, but fridges would be fine. Rated to 50amps.

If you are going to the effort then run the biggest cable you can to the battery then run multiple types of sockets in the back.
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

i use the hella type plug to connect my 12inch powabeam handheld spotlight i use for hunting. have so for about 10 yrs, and my dad has in his patrol for about 15. never ever had a problem. 6mm wire straight to battery with a fuse. i even upgraded my globe to 150 watts from the standard 100. the hella plugs work perfect. never fall out, never get hot, wiring dont melt etc etc...
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

This is what I have, separate wires from the battery to each socket and 30 amp fuses

Image
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Thanks for all the input guys.. didnt think I'd get this many replies :armsup:

Since I dont have a big waeco or anything.. I'm gonna keep the Hella plug and also add a normal cigarette lighter socket also. I will run two 6mm wires from the battery through a fuse block then to the sockets and she'll be apples :D

Cheers
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests