Page 1 of 1
Replace ? Repair Hydraulic pump.
Posted: Fri Dec 02, 2005 2:06 pm
by ludacris
I have a Enerpac pipe bender and the Hydraulic pump is not workin efficiently as it should be. Is it cheaper to replace the pump or get the Enerpac pump rebuilt. Its the piece on top of the bender.
LudaCris
Posted: Fri Dec 02, 2005 2:54 pm
by zooki
about $660 for a new pump, IMHO you pay extra for enerpac and similar so you can rebuild it later
applied Hydraulics at Virginia 07 3865 6811 will be able to rebuild it
Posted: Fri Dec 02, 2005 2:55 pm
by ludacris
Thanks champ.
LudaCris
Posted: Fri Dec 02, 2005 4:04 pm
by bulldogy
Take it apart and go to a seal transmission shop and get new seals.
Normaly only the seals go.
unless the shaft has a score mark on it .
Dave
Posted: Fri Dec 02, 2005 8:09 pm
by ratboy
replace the seal very easy and cheap
take old seals to hyduralic joint get new ones and put back together
see easy