Outer Limits 4x4 Board

Mates zuk with a nice home made suspension set-up

Thought i recognised that name.

Looks sweet flexd up there. now i know what was meant by being close to the wall.

cheers

Nic

hey, nice sierra, but whats the go with the vit in the background? looks like it has half an exo of sorts.

specs? mods? pics?

cheers.

hell yeah, looks awesome =) huge flex!!!

I cant see any shocks, but it is a dark pic.
Peter.

they are there ......


just painted ..........



with invisibility paint !!!!!!!!!

(available at all laeding retailers !!!)

I think he may have put 2 coats on the bump stops

droopypete wrote:I cant see any shocks, but it is a dark pic.
Peter.

here's the lightened up versions, easier to sqizzy at
It's going to be cool when finished

christover

Could you please take some more pics?

These photos are blurry and show little detail

Cheers
HR

and add some details about has actually been done. IE Specs and tech

Flexes well Drew will be up Thursday early to finish it of

Yeah some more details guys.

The Zuk is owned by Drew off this board. After poping 3 axle’s in one day he decided that he needed to beef up the drive train. I suppose you get that when you have 34â€

very nice rig ... its sorta like mud4b's setup .. long arm kit on coils .. alittle differant though

any ways look good and more pics

those pics are from a mates phone,i have some better ones will get them put up tonight.

just flexed it up to get an idea of where to place shocks,bump stops, t/shaft lengths etc.

specs are 4agze twincharged TO3 big injectors front mount intercooler,t50 box stock tranfer gearing,lux diffs 4.88 ratio 1 airlocker for now.
suspension is double tri 4link in the rear with vit coils,front is 5link, 34x10.5x15 jt2 kplus.
i have to keep the rear seat for my kids & its a daily driver so we had to compromize with a few things but im happy with the progress so far, hopefully we will have it finished before christmas.

HUGE HUGE thanks duncan for all the help & advice with the coils.

looking very nice, will have to come up and have a look, when your free

The vit is also in the build at my place so far it has a import 16v carb eng,33s no lift lots of cutting,welded rear,front to be welded,stripped out dash & int, the exo has been started.

your welcome any time shane.
forgot there is another sierra hear getting a 4age 20v quad thottle body eng , will post some pics of it later also

suspension is double tri 4link in the rear

What does that actually mean, any pics ?

Black_Dragon wrote:

suspension is double tri 4link in the rear

What does that actually mean, any pics ?

4 control arms to loacate the diff

none of them are parrallel when viewed from the top

dosenot have a panhard bar

cool rig drew, at least there is goin to be sum decent zooks around to wheel with 4 once

Drew wrote:your welcome any time shane.
forgot there is another sierra hear getting a 4age 20v quad thottle body eng , will post some pics of it later also

cool

Some more dodgy phone pictures... I can't afford a proper camera coz I spend all my money on this stupid phone

This is drew's motor.. 4agze supercharged and turbo'd with a T3. Hit's full boost at 2500rpm





This other one is the 4age 20v quad throttle... Not finished yet, but it does run! What a crazy motor. It's a VVTi (variable valve timing injection) which goes absolutly nuts around the 6000rpm mark and rev limits at 9000rpm. Not sure how good it would be in a 4by but we will see. I imagine it will have enough power to crawl really well with the right gears, but then when you need to spin hard you don't need to change gear coz you can just wind it out into the high revs and watch it smoke! Something drew mentioned was that it doesn't allow the room for the clutch booster. He had to addapt a remote resivior tot he pedal box, which was sourced from a van.



enjoy

The zuk is looking very nice drew, looking at the quality of some of the brackets u can tell he has spent a few hours on it.

Drew is a very switched on bloke, he has done a few conversions and puts in the extra effort to use stock parts from other vehicles as aposed to custom parts, and it all looks very good, tight fit but looks good none the less.

PS
that 4age 20v quad throttle thing was very very cool and sounds hot, i want one

For $1500 hell yeah it's wicked!

bling! bling!

bazooked wrote:bling! bling!

I tell you what it was worth the drive to go see what drew had been up to. Currently he has three rigs in his driveway.. I'm so jealous

his got it made ... i wish i was allowed that many toys

$1500 for a 4age 20v quad throttle WHAT A FIND !!!! i bet when ya finished with it you will be able to wheel stand the zook ... might have to invest in a wheelie bar hehehe

Hi,

The 20v one is a mates one that is getting converted and wired.

thanks

Nic

is it road legal hear in WA was that orignally a leffy

no. and yes to leafy. 89' orig model