Outer Limits 4x4 Board

how r we all doin? jus doing some thinking and i couldnt find the answers i needed by searching so i hope i could find some help here
first of all i need to know the wheel base of the ute, the lwb and the swb?
and then more importantly the costs involved with chopping a lwb into an extra cab tray back?

can i also get some info on any of the dramas, drawbacks or any othere ideas bout chopping a gq . that would be great

catch,

Wagon Wheelbase: 2970mm / 116.9"
SWB Wheelbase: 2400mm / 94.5"
Ute Wheelbase: 2970mm / 116.9"


Some reputable mobs here in brissy do the drive in drive out conversion for about $5000 plus tray I think

BIG GQ wrote:Wagon Wheelbase: 2970mm / 116.9"
SWB Wheelbase: 2400mm / 94.5"
Ute Wheelbase: 2970mm / 116.9"


Some reputable mobs here in brissy do the drive in drive out conversion for about $5000 plus tray I think

closer to $10000 from what i found if you want it looking micky mouse when ya pick it up,$5000 got it chopped and sealed and that was about it.

creative conversions was the place i looked.

ring sandy at aus 4wd
he will be cheaper than creative.
03 9729 4899
his the man for the job he can even bob tail it

mickyd555 wrote:creative conversions was the place i looked.

having looked at Ron Moons conversion at the 4b show, Creative conversions (sure that was where he got his done) looks worth the coin, it was nothing but fuckin professional.. Looked factory.

gqmad wrote:ring sandy at aus 4wd
he will be cheaper than creative.
03 9729 4899
his the man for the job he can even bob tail it

I thought he closed the workshop to do some travelling

grimbo wrote:

gqmad wrote:ring sandy at aus 4wd
he will be cheaper than creative.
03 9729 4899
his the man for the job he can even bob tail it

I thought he closed the workshop to do some travelling

Nope. but they have moved as I found out last week the hard way :(