Page 1 of 1
PCD of toyota 6 stud
Posted: Wed Dec 07, 2005 5:53 pm
by hypo
Im chasing the PCD (pitch circle diameter) of the wheel studs on a toyota 6 stud axle.
i need this to make some custom rim centres, but i havnt got a rim i can measure easily or the time for that matter....
Posted: Wed Dec 07, 2005 6:03 pm
by The Fish
Off the top of my head it's 138.5mm. Someone else will confirm this. I will go outside and have quick measure with a ruler
Posted: Wed Dec 07, 2005 6:53 pm
by hypo
The Fish wrote:Off the top of my head it's 138.5mm. Someone else will confirm this. I will go outside and have quick measure with a ruler
thanx mate
Re: PCD of toyota 6 stud
Posted: Wed Dec 07, 2005 7:08 pm
by redzook
hypozook wrote:Im chasing the PCD (pitch circle diameter) of the wheel studs on a toyota 6 stud axle.
i need this to make some custom rim centres, but i havnt got a rim i can measure easily or the time for that matter....
6 on 5.5" pcd?
Posted: Wed Dec 07, 2005 10:05 pm
by NiftyNev
Almost certain it is 139.7 metric which should convert to 5.5" imperial.
Nev
Posted: Thu Dec 08, 2005 10:40 am
by Ryano
Roger that.... 6/5.5 or 6/139.7.
Cheers,
Ryano
Posted: Thu Dec 08, 2005 11:27 am
by The Fish
The Fish wrote:Off the top of my head it's 138.5mm. Someone else will confirm this. I will go outside and have quick measure with a ruler
I did say off the top of my head
Am I bad
Posted: Thu Dec 08, 2005 3:38 pm
by 4sum4
NiftyNev wrote:Almost certain it is 139.7 metric which should convert to 5.5" imperial.
Nev
yes imperial 6 @ 5.5"
Posted: Thu Dec 08, 2005 10:00 pm
by hypo
Sweeeeeeeeeeeeeet guys thanx