Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Grille type thang
Grille type thang
im no panel beater but im havin trouble removing the front mask (?) thing that the actual plastic grille itself sits in. any help would be great.
There is a heap of philips headed screws all around the place on that panel, you will need one of these (see pic)
edit pic not working go here instead,
http://buy1.snapon.com/catalog/tools.as ... apon-store
then the joins themselves are brazed (but very lightly) use a file to remove most of the weld (but none of the panel) and it should come out.
Peter.
edit pic not working go here instead,
http://buy1.snapon.com/catalog/tools.as ... apon-store
then the joins themselves are brazed (but very lightly) use a file to remove most of the weld (but none of the panel) and it should come out.
Peter.
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 0 guests