Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

vibration problem in serria

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 162
Joined: Mon Apr 14, 2003 12:23 am
Location: Canberra

vibration problem in serria

Post by suzidisco »

has any one had vibration problem in there serria at low speed 0-20k and then when you take you foot off at 80+k put the foot back down instantly goes away or at least 95% of it

I have checked the transfer and it is fine gearbox has just been checked out and is a litte worn in the bearings but still has plenty of ks in it acording to my gearbox place. Unis where all replaced less than 10thou ago and are all in good nic but there is a little bit of movement in the drive shart splines but not sure how much is too much. Diff have just been reco with my new lockers with all new wheel bearing


ANY IDEAS WERE TO LOOK NEXT as i think it is either in the drive shafts or engine

HELP PLEASE
5" lift front locked looking for bigger tyres
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

possibly drive shaft, grease it up with sum nice thick sticky grease, if there is still play in it get it fixed.
buggy time............
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests