Outer Limits 4x4 Board

Posted: **Tue Dec 13, 2005 5:34 pm**

Does anyone know if the swivel housings on the 79/80 series are the same?

I mean as in the bolt holes on the back of them where the seals go and the tube that goes into them??

I have been havin probs with mine sealing even after i replaced them and i have found this: http://www.gearingdynamics.com/cvboot.htm

I reckon it wil solve a lot of my prob..

just not sure if it wil bolt upto my hub....

Posted: **Tue Dec 13, 2005 7:11 pm**

Posted: **Tue Dec 13, 2005 8:16 pm**

That is interesting... i have the same problem with mine

Posted: **Tue Dec 13, 2005 8:28 pm**

Mad Cruiser wrote:That is interesting... i have the same problem with mine

Well once i find out if they fit i will let ya know...

Im 80% sure the swivel housings would be the same tho

Posted: **Wed Dec 14, 2005 8:33 am**

Yes they are the same all the seals and parts that seal the swivel are identical (80, 78, 79 and 100 series) I have fitted 80 swivels, hub's, brakes etc to a 79 housing when fitting it to a Hilux and it had to be 6 stud hubs all went together no probs. The swivels may be different on the lugs were the caliper bolts on but otherwise they are the same.

Wally

Posted: **Wed Dec 14, 2005 4:26 pm**

thanks wally

I also rang toyota today and they also confirmed they are the same..

Outer Limits 4x4 Board

79 and 80 series swivel housings?? are they the same??

79 and 80 series swivel housings?? are they the same??