Making me own indicators and brake tail lamps to fit inside the factory housings.
What can i do with the inidcators as if i understand they need to be certain wattage or the flasher will be flashing faster then normal.
Basically doing the same as the jaycar plug in led globes but with no holders to rust out. keeping orig holders for ease of fitment.
cheers
Nic
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LED indicators DIY
Moderator: -Scott-
LED indicators DIY
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Hi nicbeer, curious as to why you want to change to LEDs.
At present non of the LED type lights are as bright as conventional light globes in many lighting condition.
They tend to be very directional and this means that unless you are directly behind them, they are had to see.
You might want to do a few experiments with them before you go replacing your existing globes.
Cheers
At present non of the LED type lights are as bright as conventional light globes in many lighting condition.
They tend to be very directional and this means that unless you are directly behind them, they are had to see.
You might want to do a few experiments with them before you go replacing your existing globes.
Cheers
2007 TDV8 Range Rover Lux
2009 2.7 Discovery 4
2009 2.7 Discovery 4
Yeah, I should have said that although you can solve the flashing speed problem with a different type of flasher relay, the LED tail lights, brake lights etc are pretty useless junk imho, and I wouldn't have them anywhere near my car.drivesafe wrote:Hi nicbeer, curious as to why you want to change to LEDs.
At present non of the LED type lights are as bright as conventional light globes in many lighting condition.
They tend to be very directional and this means that unless you are directly behind them, they are had to see.
You might want to do a few experiments with them before you go replacing your existing globes.
Cheers
Jason
This is not legal advice.
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
The problem with the LEDs are that they are directional and dont make use of the lights reflectors, but there are now LED lights out there with additional LEDs the face rearwars so you get better use of the reflectors.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Who is online
Users browsing this forum: No registered users and 3 guests