Outer Limits 4x4 Board

hi all i have a set of hella rallye 2000
and they were given to me in peices and i cant figure out how it all goes back together

does any one have any way they can help me
description
or a like schematic or some thing


cheers
elliot

just a quick question would a pic of all the parts layed out help
please let me know if it would

If you get pics i can certainly help.I used to have 2 sets of these and they were GREAT!

here are the pics if they can help in any way

O.k.
I will have a look to see what i can do.

From memory, the little clipc hold the lens in the outer black ring and the square looking pieces that look like a piece of angle hold the lens assembly in the frame.

Just took a couple of pics with my phone. Hope these help.

dunno why they come up black, but they work, just clikky...

hi

so 2 of those black wire thing are the only things that holds the glass lense in the black ring

cheers
elliot

phippsy beat me to it on monday.

Yep.There is usually at least 4 of those springs that hold the lense in.

hmm interesting the ring only has 2 holes should it have more

cheers

elliot

bump still cant get it

runnin4life wrote:hmm interesting the ring only has 2 holes should it have more

cheers

elliot

there should only be 2 holes, 1 top and 1 bottom, which fits the ring/lens assembly to the body of the light

nopes in the ring i have 2 holes right next to each other
i may just drill some holes and use these black wire to hold it in black


so if i get this right there are only 4 of those wires that hold the lense to the black ring then the ring attaches to the outer body part of the light eg the big black dome

how the hell do they go in im seriously getting pissed i have sat there for hours trying diffrent way to get htme in and the stupid bit is there is only 2 holes next to each other

any chance some one could just unscrew the back of there one and take a pic to show the direction the little black wires go in to the holes and so forth cus im close to geting it i just need that little clue lol

cheers
elliot

Short of pulling it apart myself I hope these help. At least I can get better pic's with a digital camera that's not on my stupid phone.

The 2 holes close together at the bottom are only to let water out, those w wire's hold the light to the frame, the big U shapeish one holds in the globe from my mem.


Had them got something better.




2 x Light Force H I D ' S, TO MUCH LIGHT IS BARELY ENOUGH !

The 2 holes close together at the bottom are only to let water out, those w wire's hold the light to the frame, the big U shapeish one holds in the globe from my mem.


Had them got something better.




2 x Light Force H I D ' S, TO MUCH LIGHT IS BARELY ENOUGH !

The 2 holes close together at the bottom are only to let water out, those w wire's hold the light to the frame, the big U shapeish one holds in the globe from my mem.


Had them got something better.




2 x Light Force H I D ' S, TO MUCH LIGHT IS BARELY ENOUGH !

wow is there an echo in here
phippsy

your a freaking ledgend thanks thats exactly what i needed
cheers
elliot

well just realised i dont have enough of the black clips ive only got enough to do one light

ahhh horse shit


any onek now where i can get some more
cheers
elliot

Maybe give a Hella stockists a call, here is a link to the breakdown of the parts in one of these suckers for ya.
The clips are part #: 9.1160.02 Lens retaining spring

http://db.hella.com.au/cgi-bin/catalogu ... lmaint=696

thanks mate

will give it ago
cheers
elliot