Page 1 of 1

4 runner question

Posted: Thu Dec 15, 2005 9:13 pm
by Tayls
g'day all,
Im thinking about getting a 4runner. I wanted to know what was the last year that the 4runner came out with leaf front?

Also, id be looking a engine conversion, maybe thinking the 2.8/3.0TD? Hard conversion?
What would be some rough prices?
what other conversions are generally done?

Posted: Thu Dec 15, 2005 9:18 pm
by the plough
i just finished putting a 2.8 turbo into my hilux (same as 4runner). It is pretty much bolt in operation, maybe a few different connections (same wires different connection), but thats all.
I paid bout $2500, which included engine, new clutch, engine mounts, fuel/water/air lines. I did everything myself

Posted: Thu Dec 15, 2005 9:31 pm
by Tayls
hows the performance? Can it manage a hill at 100kms?
What about economy?

Posted: Fri Dec 16, 2005 12:06 pm
by +dj_hansen+
Pre 86, and some early 86 models were solid axle front.

Swapping over to a 2.8 diesel motor is dead easy as the motors are the same size physically...

Get hold of a 1KZ-TE with R151F and Gear driven transfer and slap it in...... shouldnt be too hard :D :D

Then get 4.88's, airlockers, and IFS rear housing and IFS front hubs and hit the tracks!

Posted: Sat Dec 17, 2005 2:58 pm
by Tayls
IFS rear housing?... what advantage will i get out of that.

Posted: Sat Dec 17, 2005 3:07 pm
by -Mick-
Tayls wrote:IFS rear housing?... what advantage will i get out of that.
wider

Posted: Sat Dec 17, 2005 11:36 pm
by 4sum4
the 3.0L TD won`t bolt up and if its petrol and going deisel the clutchs are on the oppisite side so need the bell housing aswell