Page 1 of 1

parts for chev 6.2

Posted: Tue Dec 20, 2005 7:10 pm
by 6.2troopy
anyone know of a place locally (ACT) where i can get parts for a gm 6.2 deisel. need belts etc, and all the local parts stores (supercheap, autobarn etc) cant seem to help me.

Posted: Tue Dec 20, 2005 7:45 pm
by 6.5 rangie
Dewars just out of Albury/ Wodonga, they should be able to help. He imports and builds them

Re: parts for chev 6.2

Posted: Tue Dec 20, 2005 9:09 pm
by Nev62
6.2troopy wrote:anyone know of a place locally (ACT) where i can get parts for a gm 6.2 deisel. need belts etc, and all the local parts stores (supercheap, autobarn etc) cant seem to help me.
Along the same lines but for Sydney, after a top end for a gm 6.2 deisel (have the bottom end)

Posted: Wed Dec 21, 2005 5:32 am
by brighty
If you want a sydney store... try Eagle Auto Spares.... 9771 5599, from memory i think they're in Revesby, but not positive.

Or try Brunswick Diesels in WA. I just had an injector pump overnighted to me last week and they couldn't be more helpful. I was more than pleased with their sevice. Ph 08 9726 1431 or www.brunswickdiesels.com.au

Re: parts for chev 6.2

Posted: Wed Dec 21, 2005 7:22 am
by mkpatrol
6.2troopy wrote:anyone know of a place locally (ACT) where i can get parts for a gm 6.2 deisel. need belts etc, and all the local parts stores (supercheap, autobarn etc) cant seem to help me.

What do you mean by Ect?

If you take a complete belt to Repco or Autopro they will be able to measure the belt for you to match up. Also if the belt isnt too bad there will still be the numbers on the back.

Supercrap & Autobarn are no good for sourcing hard to get parts, just seat covers & neon lights (Fully Sick).

Posted: Wed Dec 21, 2005 8:06 am
by 460cixy
cbc on fyshwike or tractor replacements in fyshwike or go see repco

Posted: Sun Dec 25, 2005 4:04 pm
by sarg
Try Suburban Imports in Brookvale/Dee Why. Import & supply heaps of Chev gear, & as good a price that you'll get

Posted: Thu Dec 29, 2005 1:08 pm
by ozhumvee
Was going to say that a decent parts place will be able to match the belts by measuring the ones you have or reading the numbers off them.
I've got the numbers for the ones for the 6.2 in my humvee but I'd reckon they would be different to what you want.
what else do you need ?
Linquip in QLD is another source of bits. bit hard this time of year though.