Outer Limits 4x4 Board

bad_religion_au has asked if i could ask these questions about 60 series double cardigan joint,

he wants to know these two questions:-

1) how much length do they add to your drive shaft?

2) do they take the same sized uni joints as a 40 series driveshaft?

cheers

Dean[/i]

different size joints.

Agree

As for length think of it as 2 uni yokes joined at the hip.
use them to counter shaft angle rather than create a longer shaft
so work out the whether you need it for the angle and work out if you need a double cardan or if you just need a longer shaft..

scotto wrote:Agree

As for length think of it as 2 uni yokes joined at the hip.
use them to counter shaft angle rather than create a longer shaft
so work out the whether you need it for the angle and work out if you need a double cardan or if you just need a longer shaft..

pretty sure he needs it for the length as his wheel base is extended even longer now and the splines are just interlocking (excuse my daftness )

scotto wrote:Agree

As for length think of it as 2 uni yokes joined at the hip.
use them to counter shaft angle rather than create a longer shaft
so work out the whether you need it for the angle and work out if you need a double cardan or if you just need a longer shaft..

yeah, but i had the opportunity for a free one, so if it did the job (and the uni's were compatible) i'd be gold.

but they don't so back to the drawing board

45 spunkbus, nice daftness ya tard!
speaky the english aye???

DIRTY ROCK STAR wrote:45 spunkbus, nice daftness ya tard!
speaky the english aye???

fluent DRS

B_R how far forward did you move front axle?

scotto wrote:B_R how far forward did you move front axle?

not front... REAR.

front shaft for rear of cruiser... 'm already running a 55 series front in my rear.

front axle i'm not touching till my rear is sorted (move it back further, shaft, brakeline, rear springs.)