Page 1 of 1
tb42 valve clearances
Posted: Sun Dec 25, 2005 10:48 pm
by pootrol
any one know inlet/exhaust valve clearances on a tb 42.the clearances are set on the compression stroke too ARNT THEY?......................
Posted: Tue Dec 27, 2005 7:04 pm
by BowTieGQ
Factory say .38mm but lots of people have told my to go a tad bigger if on LPG as it burns a little hotter.
Posted: Tue Dec 27, 2005 7:14 pm
by BowTieGQ
Factory say .38mm but lots of people have told my to go a tad bigger if on LPG as it burns a little hotter.