Page 1 of 1

3wd mq?

Posted: Mon Dec 26, 2005 5:43 pm
by gurumon
just redid the wheel bearings on the mq...

engage 4wd, engine off
jack up front passenger side - wheel spins. lock hub > wheel won't spin
jack up front drivers side - wheel spins. lock hub > wheel STILL spins??

is the freewheeling hub stuffed or have i screwed something up when i put it back together?

Posted: Mon Dec 26, 2005 9:30 pm
by fnqcairns
Sounds OK to me but I have had a bit to drink :oops:
If you have not worked it or someone here doesnt know, yell out and I will do the experiment and let you know-when i am sober-er :P

cheers

Posted: Mon Dec 26, 2005 9:41 pm
by N*A*M
do you have a front locker and was it engaged?

Posted: Mon Dec 26, 2005 10:00 pm
by gurumon
N*A*M wrote:do you have a front locker and was it engaged?
not that i know of.... judging by off road performance i'd say no :D

Posted: Mon Dec 26, 2005 10:02 pm
by gurumon
i did some more experimenting....

wheel up in the air while i lock and unlock the other side as well as the side up in the air. end result - nfi, i'm too drunken to make sense of it all

might make more sense in the morning :?

Posted: Tue Dec 27, 2005 4:52 pm
by BASSYK
with both hubs locked and car in 4b and only one wheel off the ground you shouldnt be able to spin it unless you either
-put it in 2b
-unlock other side hub
-lift other side off the ground ( other wheel will spin in opposite direction)

Posted: Tue Dec 27, 2005 5:25 pm
by gurumon
an update.....

when i re-assembled the hub there's a ring that sits between the rotor and the hub (nfi what it's called)..... anyway - i put it in the wrong way around which meant the gear on the hub couldnt engage.

one thing i'll never get wrong again :oops:

Posted: Tue Dec 27, 2005 5:32 pm
by Screwy
gurumon wrote:an update.....

when i re-assembled the hub there's a ring that sits between the rotor and the hub (nfi what it's called)..... anyway - i put it in the wrong way around which meant the gear on the hub couldnt engage.

one thing i'll never get wrong again :oops:
was just about to ask if you had the hub apart lately cause it sounded like it wasnt engaging ;)