Page 1 of 1

landrover hubs

Posted: Tue Dec 27, 2005 7:18 am
by VICTOR
I am a nissan driver,but I have an ex army landrover amunition trailer. Its an awsome bit of gear and I am building it into a camp trailer.I want to swap the hubs for a set of nisasan ones. the hubs on it have the large centers with the grease nipples on. My question is will they fit any other truck besides a landrover.
Cheers .....Vic

hubs

Posted: Tue Dec 27, 2005 7:30 am
by THE 109
a mate of mine was going to do the same thing until he saw the size of the bearings,he said they were huge and decided to stick with them.although it would be easier for spare wheels with the nissan hubs,i don't think the hubs will fit anything else.

Posted: Tue Dec 27, 2005 7:35 am
by andrew e
the stud pattern is unique to landrover and rangie. i might be wriong though but i dont think trailer hubs will fit on any vehicle, just trailers.

Andrew

Posted: Wed Dec 28, 2005 6:56 pm
by ISUZUROVER
As said above, the stock hubs have huge bearings. If you want to convert them to 6-stud, it would be better to try and remove the studs and drill them to take the nissan/toyota 6-stud pattern (don't know if it is possible though).