Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tb42 efi dissy

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

tb42 efi dissy

Post by tuf045 »

wondering if anyone knows whether a dissy out of tb45 will fit in tb42?
have been looking for efi tb42 one for a while hard to come buy.
so if the tb45 one fits will make efi conversion easier.
cheers
Reptile fabrication.
www.agroautomotive.net
Top
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

TB45E's don't run a coil like the TB42E's so they may well be running some type of crank fired ignition on those. I don't think they'll fit the TB42E.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
Posts: 542
Joined: Thu May 05, 2005 8:53 pm
Location: Lysterfield

Post by krimnl »

the TB42 efi dissys arnt that good and are hard to come by , if your doing a efi conversion what ecu are you running ?? might be worth looking at coil pack or JPC do a bosch dissy conversion for the patrols.
Top
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

ecu

Post by tuf045 »

krimnl wrote:the TB42 efi dissys arnt that good and are hard to come by , if your doing a efi conversion what ecu are you running ?? might be worth looking at coil pack or JPC do a bosch dissy conversion for the patrols.
lookig at running either ems 8860 or mirotech ?
Reptile fabrication.
www.agroautomotive.net
Top
Posts: 542
Joined: Thu May 05, 2005 8:53 pm
Location: Lysterfield

Post by krimnl »

i would reccommend going for a AUTRONIC ecu , there are a lot of people using them now and are proving to be very reliable.

speak to Mark at JPC about a distributor , he made mine and i havnt had a problem with it , unlike the factory unit that gave me heaps of problems .
Top
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

Post by tuf045 »

krimnl wrote:i would reccommend going for a AUTRONIC ecu , there are a lot of people using them now and are proving to be very reliable.

speak to Mark at JPC about a distributor , he made mine and i havnt had a problem with it , unlike the factory unit that gave me heaps of problems .
cheers thanks.
Reptile fabrication.
www.agroautomotive.net
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests