Page 1 of 1
clucth servo
Posted: Tue Jan 03, 2006 7:55 pm
by matthewK
just wondering how much a clutch servo is worth new and second hand
think this is the probelm with my clutch
matt
Posted: Tue Jan 03, 2006 8:20 pm
by chops
What's your clutch doing?
An easy way to tell if the servo is still good: put your foot on the pedal fairly firmly and start the car - if the pedal goes down further then it's working fine
I had a problem with my clutch, the pedal would go soft/disappear and you'd have to pump it a few times in order to change gears.. turns out it was the master cyl, and not the servo
Posted: Tue Jan 03, 2006 10:20 pm
by matthewK
thats my problem finally somone who knows lolol
I had a problem with my clutch, the pedal would go soft/disappear and you'd have to pump it a few times in order to change gears
i did replace the lil tappered rubber bit in side a while back cause all fluid was leaking out
hopw did u fix it completly??
matt
Posted: Tue Jan 03, 2006 10:32 pm
by chops
brand spanking new clutch master cyl
trade price was 165 - retail around 230-ish..not cheap
Posted: Thu Jan 05, 2006 8:57 am
by matthewK
hey thanks cops for that has been a big help
but i got to ask u just got the clutch master cylinder yes?
if so i think you were ripped
im up from melbourne here in sydney priceing somthings and found
repco $162
peps fairfild $150
super cheap $154.10
but then my old man said try this place
auto one $115
i called 2 stores to double check the price and they matched so when i called repco he told me they have a new thing now its<
we wont be beaten > and they will match the auto one thats out here in campbeltown for you sydney people looking for cheap stuff
Posted: Thu Jan 05, 2006 5:47 pm
by J Top
$58 at Brake and Transmission , BnT , here in NZ
J Top