Tech Talk for Suzuki owners.
Moderators: lay80n , sierrajim
Posts: 1569 Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle
Post
by HRZOOK Thu Jan 05, 2006 6:22 pm
When you do a bodylift the hose/pipe pictured below can split be careful to adjust so it doesn't
There's the tech
Now does any body have a spare one lying around?
Cheers
HR
You do not have the required permissions to view the files attached to this post.
Posts: 3187 Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends
Post
by RB zook Thu Jan 05, 2006 6:34 pm
run a fully mad pod filter
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 5714 Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.
Post
by nicbeer Thu Jan 05, 2006 6:46 pm
Might be able to just use a rubber elbow hose.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
Posts: 1569 Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle
Post
by HRZOOK Thu Jan 05, 2006 6:50 pm
nicbeer wrote: Might be able to just use a rubber elbow hose.
different diameters at each end
Posts: 3722 Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa
Post
by bazooked Thu Jan 05, 2006 6:52 pm
boil the kettle...
buggy time............
Posts: 7954 Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania
Post
by DeWsE Thu Jan 05, 2006 6:56 pm
Whats wrong with gaffa tape?
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
Posts: 1569 Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle
Post
by HRZOOK Thu Jan 05, 2006 7:00 pm
bazooked wrote: boil the kettle...
Come on dude you should have a spare you just put a vit motor in
Posts: 3722 Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa
Post
by bazooked Thu Jan 05, 2006 7:03 pm
mine already had tape around it! cause it was split from the previous owner.
buggy time............
Posts: 212 Joined: Wed Jul 06, 2005 7:10 pm
Location: Perth, Western Australia
Post
by HotAe92 Thu Jan 05, 2006 8:06 pm
ill have to check mine
'04 NP DiD Pajero: 2" Lift, 33's, ARB Bar, XD9000 Winch, Rear ARB Locker, Snorkel, Dual Batts and Much More...
Posts: 754 Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW
Post
by Barathrum Thu Jan 05, 2006 8:50 pm
Just tape it. The tape on my survived at least a year. If it breaks tape it again. Why bother with anything else.
Posts: 1569 Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle
Post
by HRZOOK Fri Jan 06, 2006 6:04 am
Barathrum wrote: Just tape it. The tape on my survived at least a year. If it breaks tape it again. Why bother with anything else.
Because it proably isn't 100% air tight hence dirty air gets sucked into engine...may as well throw away air filter
Posts: 754 Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW
Post
by Barathrum Fri Jan 06, 2006 9:07 am
Well i suppose it depends upon where the split is. Mine was in the middle. I removed the hose and cleaned it before taping. and then taped the entire hose in duct tape. I can't say for sure that it was a 100% sealed because i had no way of testing it. But i do doubt that there was any leak.
Posts: 174 Joined: Thu Sep 02, 2004 12:19 pm
Location: newcastle
Post
by rgzook Fri Jan 06, 2006 3:38 pm
hey heath
Posts: 3513 Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA
Post
by alien Fri Jan 06, 2006 4:06 pm
Karmic on here has my old one laying around i think? maybe ask him?
The worst thing about censorship is ███████.
Posts: 8459 Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville
Post
by "CANADA" Fri Jan 06, 2006 6:56 pm
HRZOOK wrote: Barathrum wrote: Just tape it. The tape on my survived at least a year. If it breaks tape it again. Why bother with anything else.
Because it proably isn't 100% air tight hence dirty air gets sucked into canadas engine...may as well throw away air filter
Posts: 4275 Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney
Post
by ozy1 Fri Jan 06, 2006 9:47 pm
what diameters are the pipes at either ends, most performance people who do intercoolers and gear like that will be bale to get you reducers and the like in many different colours,
Posts: 165 Joined: Tue Oct 12, 2004 8:33 pm
Location: clontarf, qld
Post
by inka Sun Jan 08, 2006 8:57 am
flexy hose and a couple of hose clamps
rockstock gq patrol
Posts: 380 Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane
Post
by Cruzer! Sun Jan 08, 2006 10:30 am
If your still after one message me may be able to help
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Posts: 8459 Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville
Post
by "CANADA" Sun Jan 08, 2006 10:42 am
i know the best fix for that heath....a 1.6
Users browsing this forum: No registered users and 58 guests
