Outer Limits 4x4 Board

I have searched and didnt find any good pics

I have a 2" OME lift and I am thinking of getting a tintop tube and replace my softop,maby a 2" bodylift when Im at it. So If anyone have pics of a tintop with 2" or 4" lift and 31" I would love to see them

Oh and I would have to usa a 410 tube since the 413 tubes only came with the high roof here




thanks

Mine has 2" b/l 3" spring and 31's

2" lift, 32'' Simexes ,still springunder!

3inch body, standard springs, 31inch Simex Extreme Trekkers (PEDS).

YJs, SUA (about 3.5" lift)
30x9.5s, stock rims

brother zook.....

2in body + 2in susupension with OME Rears and Hilux Rears upfront.

wide tracked, SPUA and Power Steer.......

Running 32/9.5/15 Pede's..

2 inch body
1inch springs mix and match set
30inch motorway mudders

thanks guys, they all look good

I think I will swap for a tintop,altough it can take some time to find one since they are rare. will paint it red.. or black

when it was sua
2inch bl and about 2inch springs

2"body lift and 2"springs 31"mtrs

Mine.. 2" body, 2" springs 31-2 Mongrels

Thanks all


Im going to pick up an 84` body tomorrow.
Have anyone placed a 84 410 body on a 86 413 frame before? I know I have to make the brakebooster fit. And i dont like the 84 dash so Im going to install a 86 dash.I suspect its not bolton Anyone done it? Is it hard to do,what else needs to be done?



[img]http://www.offroad.no/snitz/uploaded/pà ... C00021.JPG[/img]

thanks

here u go.

http://www.outerlimits4x4.com/PHP_Modul ... light=body

thanks!

I dont think its all listed there as far as I can see,I will come back and make a list of mods I had to make it fit

I think this is the cleanest and coolest tintop I've seen....