Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Diff (Will it fit??)

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 31
Joined: Sun Jan 16, 2005 7:00 pm
Location: Gipps, VIC

GQ Diff (Will it fit??)

Post by steveothedevo »

I have drum brake rear ender GQ at the moment and i bought a disc brake housing with axles, rotors, calipers etc planning swapping the on putting the drum centre in the disc housing.
Will this fit?
And what air locker do i need..... disc or drum style?
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

...

Post by JemmyBubbles »

The Drum Centre will not work in the disc housing. IF that is what you are asking.....

The disc housing WILL completely bolt in, in place of the drum housing. Ie; all trailing arm, panhard mounts, brake lines etc are the same..

Make sure the two housing have the same ratio's. Most likely both will be 4.1 but you could be unlucky..
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: ...

Post by bogged »

what about mounts for the arms etc?
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Re: ...

Post by Tiny »

bogged wrote:what about mounts for the arms etc?


I beleive it all fits, same susp set up etc, just different diff
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 33
Joined: Wed Dec 11, 2002 4:56 pm

Post by GUpatrol »

I would compare the centers.......as I did the swap in a SWB GQ many years ago and the center wer the same.
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

i recall reading something about the exles in the drim brake diff being 10mm longer, or something, had somethign to do with somehting in the diff centre,

i may be wrong, but was something wierd like that,
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

..

Post by JemmyBubbles »

That sounds about right ozy there is a specific reason.. Yeah mounts for arms etc are all in the exact same place. It is a simple bolt up, did it with mine...

You can't swap centres between the two. Can only swap over complete housings..
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests