Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gearbox Problem

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1287
Joined: Wed Oct 05, 2005 9:12 pm
Location: The city of churches and bizarre sex murders

Gearbox Problem

Post by rojak »

This morn I took off from the lights and when changing form 1st to 2nd, I heard a clunk from the bottom of the gear stick, then the gearstick became sloppy and when changing gears, it feels and sounds notchy. The stick is really loose. Its the same in 1 - 4 but haven't tried 5 and reverse appears(?) ok.

Apart from this it goes into gear ok (so far) :?

Can anyone suggest what I may have broken or whats causing this.

Thanx

g/box is a H55F
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

The stick rolls on a ball which is supported by a round tapered disc...bet that has broken...common.
Andrew
Top
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

There are 2 pins that locate the gearstick and the retaining cup thingo.
The pins in mine have work and are loose - my stick is sloppy and notchy and a bit of a pain to get in and out of gear... Hoping I can tap the holes where the pins are and get a couple of bolts in there to hold it firm again..

may be the same, maybe not..
scotto
www.3rdrock4x4.com
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest