Outer Limits 4x4 Board

hi everbody, i have found on ebay, a brand new head for a sigma 2.6, 4g54. the guy selling it tells me that it will fit a sigma, but not the pajero 4g54 engine. are the heads on sigmas and pajeros different? i was under impression they are the same. thanks in advance for your help.
cheers
Dan.

Might fit. Different coolant passages between head and block but gasket might make them incidental. May be other differences but can't remember.
The last of the Sigmas (GH??) might fit but pay to compare side by side first.
peter h

shhould fit have you got pics of it? i used a carby magna head on my 2.6 paj had to get a water way closed up wher the manifold bolts on. and just took the pully off the back for the water pump. if you can get pics i can tell ya if it will fit

Photograph the bottom face that mates with the head gasket.

i will try to get a picture, im just unsure how to post it in here, i will see what i can do.

this might work. good photos too.
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... otohosting

It looks like the right one. I contemplated a head of a sigma once but it must of been a lot earlier and was all open between the water ports around the combustion chambers.

looks like a goer but i want see the water galery on the inlet side to see if its the same. but it can be modded to suit your inlet anyway looks like a good head

thanks guys, the head has been on ebay for a few weeks now, nobody bought it last time, and they only wanted $150 for a brand new head. might be worth getting even if it doesnt fit.