Page 1 of 1
Temp gauge ohms range
Posted: Sat Jan 14, 2006 9:30 pm
by Rangie Thing
Hi to all i was just woundering what ohms range that a 74 range rover use's and also do range rover temp senor have three screws to hold them in and are not the screw in type Thanks.
Posted: Sun Jan 15, 2006 9:20 am
by Philip A
The three screw thing on top of the manifold is a sensor which turns on a light to indicate that you have left the choke on. Nothing to do with the gauge.
The temp gauge sensor is a screw in sensor at the front of the manifold next to the thermostat housing.
Sorry do not know Ohms.
Posted: Sun Jan 15, 2006 9:50 am
by landy_man
ummm... my choke light is actuated by a little switch thingy attached to the choke cable just behind the dash...
i am pretty sure that the triangular switch is for the thermo fans in front of the radiator...
Posted: Sun Jan 15, 2006 12:22 pm
by peter r
G`day , sender is as Philip describes . Can`t help with the omh range .
Both Philip and Craig are correct about the other sender .
Philips for a manual .
Craigs for an auto .
All the best , peter .