Outer Limits 4x4 Board

my gq had problems with a front wheel bearing being loose and the nuts welding themsleves to the hub.

was away from home and after expensive repiar bill drove 300k back to sydney and found the new bearing was loose. After mate retightened it im finding that the hub is heating up a lot to the point u cant touch it after driving around 15ks.

Has anyone else experienced anything similar? any ideas what could be wrong?

Thanks

its too tight or not got enough grease if its getting hot

do you have 35's on the riG?

running 33s on it

too much grease will also cause the hub to heat up too