Hello everybody,
I have a SIII 109â€
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
brake warning light on sIII
Moderator: Micka
brake warning light on sIII
broom broom!
you should have ( i think ) -----
1 x test switch, to test the brake fail lamp
1 x vacuum fail switch on booster
1 x pedal travel switch (brake wear)
1 x doohickie on the brake lines that triggers on front / rear preasure inbalance
IMO - they are all shit / a complete waste of time. Rip them out.
i ripped all the above wiring out of mine, except for the front / rear balance doohiki.
IIRC - all the switches switch to ground. pretty basic circuit.
what motor is now fitted to your series beast ?
1 x test switch, to test the brake fail lamp
1 x vacuum fail switch on booster
1 x pedal travel switch (brake wear)
1 x doohickie on the brake lines that triggers on front / rear preasure inbalance
IMO - they are all shit / a complete waste of time. Rip them out.
i ripped all the above wiring out of mine, except for the front / rear balance doohiki.
IIRC - all the switches switch to ground. pretty basic circuit.
what motor is now fitted to your series beast ?
Ex-Army - SeriesIII -186s - NP435 - Maxi rear - megasquirt coilpack ignition - AM FM radio with 2 X speakers
Who is online
Users browsing this forum: No registered users and 0 guests