sealing bellhousing, coily

Post by **Nisspatrol** » Wed Jan 18, 2006 7:28 pm

hello all,
had a small sump leak the other day so i pulled it off and fixed it but i noticed the plate that bolts to the bellhousing at the bottom to make up the gap, its not sealed very well at the top where it meets the engine block, im goin to fraser on saturday and want to seal it (stop the sand), anyone got any ideas(sikaflex???)
cheers

Post by **oozuk** » Wed Jan 18, 2006 9:20 pm

pull off the inspection plate and sickaflex it up and bolt it back up there

otherwise there pretty good,

also be a good idea to fix the rear main oil leak before it gets into the clutch and gives you trouble

Post by **Nisspatrol** » Wed Jan 18, 2006 11:14 pm

thanks, whats the best manual to get for a zook, the gregorys one doesnt exist is there anything else?
cheers

Post by **nicbeer** » Wed Jan 18, 2006 11:27 pm

Download the one from www.suzukiinfo.com

Post by **Nisspatrol** » Thu Jan 19, 2006 4:41 pm

wicked, i have a 97 coily, most of the stuff will be the same ey, like replacing the rear seal and stuff?

Post by **oozuk** » Fri Feb 03, 2006 11:21 pm

only buy the genuine suzuki manual, the rest are shit and gregories has some inncorrect specs in it

Outer Limits 4x4 Board

sealing bellhousing, coily

sealing bellhousing, coily

Who is online