Page 1 of 1

Wiring Diagrams

Posted: Wed Jan 18, 2006 7:55 pm
by HRZOOK
Hi All

I am putting a 1.6 MPI engine into my coily zook :armsup:

The guy that is doing the wiring wants a wiring harness diagram for the coily and Vit

Can anyone help out??

Thanks
HR

Posted: Thu Jan 19, 2006 3:52 pm
by rgzook
Hey heath i noticed this link in another thread
found a wiring diagram from the us zooks but should be same

www.suzukiinfo.com

hope it helps
heaths

Posted: Thu Jan 19, 2006 7:19 pm
by karmic
rgzook wrote:Hey heath i noticed this link in another thread
found a wiring diagram from the us zooks but should be same

www.suzukiinfo.com

hope it helps
heaths
I *PROMISE* I'll try and finish scanning my sj413 FSM shortly and add it to the site. I can do the wiring diagram in the next few days if you like.

Kyle

Posted: Fri Jan 20, 2006 11:42 am
by Pinball
is coily different to the sj413?

i got the wiring diagram and electrical section scanned into the downloads at http://pointnshoot.whoever.org

Spock

Posted: Fri Jan 20, 2006 12:17 pm
by HRZOOK
Thanks guys

Posted: Fri May 12, 2006 11:47 am
by HRZOOK
Got diagrams uploaded on website

Good for 1.6 16 valve engines sometimes G16B (Aus) G16A (Import)

Get it from
HERE

Full wiring diagram from Russia
HERE

Engine Diagnostic Codes
HERE

Posted: Fri May 12, 2006 10:30 pm
by SLOGQ
Hey my wiring diagrams are on the net..... kewl !! On ya matty it took me ages to find them!

Posted: Sat May 13, 2006 8:09 am
by HRZOOK
SLOGQ wrote:Hey my wiring diagrams are on the net..... kewl !! On ya matty it took me ages to find them!
What book are they from??

Thanks Cut 4B & SLOGQ ;)

Posted: Sat May 13, 2006 9:53 am
by SLOGQ
Gregorys EFI wiring diagrams manual Volume 4.

Posted: Sun Jun 04, 2006 8:53 pm
by tube suzi
did anybody ever find a copy of the SJ80 wiring diagrams?? I am trying to match up the combination meter wiring from my coily to that of an M13a jimny.

Any help appreciated.

Posted: Tue Jun 06, 2006 10:05 pm
by Gutless
Anybody got a link to this wiring diagram?? I specifically need the pin codes and wire colours for the back of the instrument cluster :?