Outer Limits 4x4 Board

Posted: **Fri Jan 20, 2006 6:19 pm**

Right o just pull a centre out of my mates lux and as per the tread it had a pinion with 12 teeth and a crown wheel with 39 teeth so WTF are they out of.I could only think of a crown or celica or some thing.If not thats what they would be good for

Posted: **Fri Jan 20, 2006 10:14 pm**

2wd lux

Posted: **Sat Jan 21, 2006 3:55 pm**

maybe an early model holden (pre-salsbury) they can be fitted to a hilux housing pretty easily just a thought.......

Posted: **Sun Jan 22, 2006 4:05 pm**

4sum4 wrote:2wd lux

ARE you sure or is that a guess

Posted: **Sun Jan 22, 2006 4:25 pm**

3.7 is the tallest i have ever seen from factory. And 3.54 are available after market. Never seen or heard of a 3.25.

And i dont know why anyone would even think of using a Holden Banjo centre in a hilux. The axles wont fit even if it is an easy job to bolt it in.

Posted: **Sun Jan 22, 2006 4:39 pm**

maybee a hiace van ??
is it a complete 3rd ?? couldnt be out of like a ricer or something ?

Posted: **Sun Jan 22, 2006 5:22 pm**

gtwebbie wrote:
4sum4 wrote:2wd lux
ARE you sure or is that a guess

Inbetween, I thought 3rd gen 2wd lux had 3. something

Posted: **Sun Jan 22, 2006 6:46 pm**

Well IFIIK,

its a lux centre absolutly know doubt cause after well pull it in went a 4.3, so looks like hell b getting another 4.3 for the front then

Posted: **Thu Jan 26, 2006 11:57 am**

Howdy Webbie,
I've got a set 3.5 centres (after market Jack Macnamara's) in the shed. I got them with the diffs I bought ages ago.
Not sure what good they would be for off road work but for highway work they'd be fine.

Posted: **Thu Jan 26, 2006 9:50 pm**

gtwebbie wrote:Right o just pull a centre out of my mates lux and as per the tread it had a pinion with 12 teeth and a crown wheel with 39 teeth so WTF are they out of.I could only think of a crown or celica or some thing.If not thats what they would be good for

Over the years I have imported alot of Hilux diffs
I know of 15 different ratios
3.07
3.45 38x11
3.54 39x11
3.72 41x11
3.9 39x10
4.1 41x10
4.11 37x9
4.3 43x10
4.375
4.556
4.875
5.14
5.29
5.73
6.8
Are you sure you counted the pinion correctly maybe 11x39 = 3.54

Posted: **Thu Jan 26, 2006 10:15 pm**

Righto boys have some new feed back in that they are probly toyota Crown C&P how does that sound, I have also since found out the previous owner used it for mud comps ,maybe thats where the high diffs would have been needed.

Posted: **Fri Jan 27, 2006 5:43 pm**

can anybody tell me is there a standed diff ratio that comes out on a lux as i dont know what mine is (97 dual cab)

Outer Limits 4x4 Board

O.K lux gurus what are these CWP out of 3.25ratio in a lux ?

O.K lux gurus what are these CWP out of 3.25ratio in a lux ?

lux

Re: lux

lux

Re: O.K lux gurus what are these CWP out of 3.25ratio in a l

ok