Page 1 of 1
bullbar modification to suit 2" body lift
Posted: Sun Jan 22, 2006 1:03 am
by chops
Anyone done this?
What is involved in doing such a mod?
photos would be helpful!
Cheers,
Brian.
Posted: Sun Jan 22, 2006 10:49 pm
by chops
could somebody move this to 'general' please?
I've posted it in the wrong section I think
Ta
Posted: Mon Jan 23, 2006 6:23 pm
by GQ4.8coilcab
if the bull bar has brakets off the chassis and then the bull bar bolts to that like TJM and other alloy bars, just drill the holes on the bull bar 50mm down, but i think i only got bout 40mm cause there aint much more meat on the bull bar.
Posted: Mon Jan 23, 2006 8:47 pm
by GUJohnno
you might need to cut the supports off vetically and the reweld and add some reinforcing plate to it
Posted: Tue Jan 24, 2006 8:53 am
by chrispy
Here ya go Chops. Please excuse the rust - I still have to get around to sand-blasting and re-powdercoating.
