Will these fit....
04 GU Patrol 4.3's into 94 GQ Patrol
and how much would it cost to have them fitted if I striped the centres out and had them ready to be fitted in....
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
04 ring and pinion into 94 Patrol
If the 4.3's are out of a ZD30, I'd think not for the rear at least because because my 2001 ZD30 (family bus) has a h260 rear diff. As far as I know (which isn't very far) GQ wagons all have h233 and I'm pretty sure they aren't interchangeable. As I said, could be wrong.
The front should be ok.
The earlier GU (RD28T) had the h233 front and rear. That's the model I got my 4.6's from.
Hopefully putting this back to the top will get a diff expert in to answer.
Regards
The front should be ok.
The earlier GU (RD28T) had the h233 front and rear. That's the model I got my 4.6's from.
Hopefully putting this back to the top will get a diff expert in to answer.
Regards
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Loose Screws 4wd Racing Team
Not all 3.0l GUs came with h260s, just like not all GU 4.8s came with h260 aswell, Nissan puts in whatever they feel like. So just check that both front and rear ring gears are both the same size......bigbluemav wrote:If the 4.3's are out of a ZD30, I'd think not for the rear at least because because my 2001 ZD30 (family bus) has a h260 rear diff. As far as I know (which isn't very far) GQ wagons all have h233 and I'm pretty sure they aren't interchangeable. As I said, could be wrong.
The front should be ok.
The earlier GU (RD28T) had the h233 front and rear. That's the model I got my 4.6's from.
Hopefully putting this back to the top will get a diff expert in to answer.
Regards
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Not just 4.8s have these little LSD centres, have seen as early as 2002 and 4.2 diesel equipped GUs come with them.............. still work better than Toyota ones though!bazzle wrote:Originally yes..... but Nissan does put a few ringers in,bigbluemav wrote:Could it be manuals (in both ZD30 and 4.8) came with h260's?
I can't believe they'd just throw on whatever was on the rack.
Latest 4800 LSD centre is tiny in the friction disks![]()
Bazzle
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Who is online
Users browsing this forum: No registered users and 3 guests