Outer Limits 4x4 Board

Posted: **Sat Jan 28, 2006 8:16 pm**

Need to replace the seals on my timing cover.
Anyone know the size for the nut holding the balance/pulley on ?
3.5 carby motor by the way.

Posted: **Sat Jan 28, 2006 8:24 pm**

If it still has the old crank starter dog, a deep reach 1&5/16" socket will do it. Later and non- crank starter bolt heads are 15/16" (24mm)

JC

Posted: **Sat Jan 28, 2006 9:40 pm**

Yep the old crank starter dog

Excellent thanks for that mate

Nut size????