Page 1 of 1
HYPOZOOK.................
Posted: Mon Jan 30, 2006 8:59 am
by hypo
OK as a few of you guys have been reading about the forum i have been coollecting parts for my own zook build.
so far i have:
- LWB chassis and body (A1's old one)
- Front and Rear 80 series landcruiser diffs
- ARB locker for the front
- 39.5x13.5x17" IROK's
- Stock 1.3 tcase (just needs gears)
- 60 series steering box, may not work now i am going coils, but ill see how it goes
- GQ master cylinder.
Sale pending:
- Vit 5spd and tcase, modded for dual case from ljxtreme
- Ford territory 17" steel rims.
All i need now is:
- Still chasing engines
- Coils
- Links
- Tcase gears for the zook case
- Diff gears
- tube for a cage
- powersteering pump
- and some spare time
Posted: Mon Jan 30, 2006 10:45 am
by jeep97tj
cant wait for the build up, looks like a nice list of parts so far.
U gona keep the body or chop it?
Posted: Mon Jan 30, 2006 12:38 pm
by hypo
jeep97tj wrote:cant wait for the build up, looks like a nice list of parts so far.
U gona keep the body or chop it?
Im going to be keeping as much body as the 39's,105" WB and low ride height will allow
Posted: Mon Jan 30, 2006 3:13 pm
by sierrajim
Posted: Mon Jan 30, 2006 4:27 pm
by hypo
hehe yeah they would be nice, but i cant afford them at this stage, altho the suspension will be linked F&R so at a later date i can always get them and put them in...
Posted: Mon Jan 30, 2006 5:08 pm
by antt
hypozook wrote:
hehe yeah they would be nice, but i cant afford them at this stage, altho the suspension will be linked F&R so at a later date i can always get them and put them in...
pm me ben about airshocks if u want em. can get them cheaper than wat opw wants for them
Posted: Mon Jan 30, 2006 6:30 pm
by CHOPZUKI
about time
get into it
Posted: Mon Jan 30, 2006 9:28 pm
by "CANADA"
if im built before you...you have problems...
Posted: Mon Jan 30, 2006 9:53 pm
by hypo
mad_landie wrote:if im built before you...you have problems...
dude u saw my junk how u think im gunna beet u by the coming weekend
Posted: Mon Jan 30, 2006 10:13 pm
by A1
A pic of HYPO and his new JUNK .................................
you would have the diffs under it by now wouldnt ya p o o o f
A1
Posted: Mon Jan 30, 2006 11:36 pm
by "CANADA"
A1MAV wrote:
A pic of HYPO and his new JUNK .................................
you would have the diffs under it by now wouldnt p o o o f
A1
acualy it looks exactly like that...minus rear leafs
Posted: Tue Jan 31, 2006 2:27 pm
by jeep97tj
are u gona keep the stickers down the side
Posted: Tue Jan 31, 2006 6:17 pm
by hypo
jeep97tj wrote:are u gona keep the stickers down the side
nah
Posted: Tue Jan 31, 2006 7:44 pm
by Red_Zook
jeep97tj wrote:are u gona keep the stickers down the side
this stickers look hawt would pull chicks
Posted: Wed Feb 01, 2006 12:23 am
by jeep97tj
hypozook wrote:jeep97tj wrote:are u gona keep the stickers down the side
nah
There was no Grimace smiley so i had to make do with the razz smiley
Posted: Wed Feb 01, 2006 10:16 am
by DeWsE
Posted: Wed Feb 01, 2006 11:28 am
by jeep97tj
Posted: Wed Feb 01, 2006 4:16 pm
by A1
Well last I spoke to HYPO reagarding what way he was goin as he was goin to keep as much panel as possible to a POINT
I think these were along simliar plans (pics)
So it shoulkd look pretty
and be a bit different to alot of others being built or that have been built ( IN OZ) ...we all know how people get fiesty with copying there ideas
Dan
Posted: Wed Feb 01, 2006 6:46 pm
by hypo
yeah cheers for the pix dan, but yeah the rear is getting dovetailed, and if i get round to it the front guards will b narrowed slighty to match the bonnet
Posted: Thu Feb 02, 2006 4:28 pm
by jeep97tj
Very nice
my plan was to dove tail but was easer just to chop it all off
should of dove tailed.
Posted: Mon Feb 06, 2006 10:17 pm
by hypo
OK small update.
this arvo i spent some time on my zook finally
anyways i pulled most of the not need interior bits out.
also removed the rusty old front clip and took out the old 1L motor and gbox and anything that i could unbolt.
plans over the next few days are get all the stuff of it i dont need and cut off all the stock brackets and mounts that wont b needed anymore.
i picked up my VIT 5spd and dual case from TNT on friday, BIG THANX TO LJXTREME.
and this weekend im hopefully picking up a VIT motor From OVERKILL
Ummmmm 