Outer Limits 4x4 Board

just wondering what wires are under the dash of the lux,2.8 diesel,
that i connect the turbo timer too....

obviously :
red = permanet +
blk = " " " " -
blue = ....(what wire in lux)
yellow = .....(what wire in lux)

i can get the think to work out of the truck,
but try hooking it up, and i just dies after the lux starts..

what's the power wire need and the switching wire,,

any help would be great.....i starting to P$#s me right off...

cheers

When hooking it up check to make sure you get the right ignition wire, I fell into the trap of using one which I thought was ignition but it was for the glow plugs so once the glowplug timer switched off so did my turbo timer. I ended up taking it to the local auto electrician and $20 later all done.

What brand timer is it? Mine is a BES older style, it had 7 wires but 3 were earth, constant 12v and ignition, the other 4 were for controlling other things after the ignition is off. I can have a look tonight which ingition wire we spliced into if you want.

its a jap one,
fully automatic etc etc,
brand is FET
Model TB-306

also it has an ebrake wire, for turning the car off ,incase some scum bag trys to drive it, while the timers on.(this one doesnt need to be connected to work.)

yer that would be great mate ,
if you could have a look for me,

red wire under dash is for glow plug power..
just unsure...

Thanks

the black is earth
the blue will most likely go to ignition wire on lux a test lamp will find this.
the yellow i think to the hand brake wire switch thing (which turns on the light in the dash) which may be your problem. ways of fixing this
1)try earthin out the yellow wire with everything else hooked up and see if thats your problem..If so leave like that or put it on your handbrake switch.
2)listen to someone smarter cause i have no idea!

all done now,
Its amasing what extra drys do for the brain!

blue when to black/red stripped
yellow to red(glow plug relay)

thanks for the help

cheers