Page 1 of 1
1.6 EFI conversion wiring diagram needed
Posted: Tue Aug 19, 2003 7:20 pm
by georges
Hows it going guys, I just discovered this, its great
I myself am half way through a 1.6 EFI conversion in my 87 serria wt. I've hit a wall, I have the early mod vitara computer with the mechanical air flow meter and I need a wiring diagram to suit this vitara (90-95 I think). I have the haines book its useless, different colour coded wires, I cant find where the oxygen sensor is ment to go in to the computer? Any help will be muchly appreciated.
Posted: Tue Aug 19, 2003 8:10 pm
by N*A*M
did you look down the page before posting?
"Wiring Diagram Needed"
http://www.outerlimits4x4.com/PHP_Modul ... php?t=6502
ask those two people to email you too
welcome newbie
Posted: Tue Aug 19, 2003 10:39 pm
by mud4b
NAM its the vitara diagram that their after.
where are you i have a full suzuki vitara diagram but its on ten bits of paper.if your close i can help with the loom as ive just done mine again.
Posted: Wed Aug 20, 2003 8:41 am
by georges
Unfortunately I'm in melbourne so I wont be able to pop over and pick it up, but the only wire I need to know is the oxygen sensor which runs from the computer directly to the exhaust manifold. What color is that wire?
The motor and wiring loom I got, came out of a sierra conversion but the wally that pulled it out just ripped the wire out of the loom so I can't tell were its ment to go, not to mention it was a birds nest in the first place.
But still a bargan at only $200 dollars ( loom, computer and motor litely cooked but complete).
Posted: Wed Aug 20, 2003 11:44 am
by greg
Hi Georges,
I don't have the wiring diagram for a vitara, but i do have the wiring diagram for a suzuki cappuccino - and we found that when installing the cappuccino motor into a sierra that a majority of wires in both cars shared the same wiring codes... this also was the same for wiring up a vitara EFI fuel tank in the car (same coloured wired as the sierra and cappo too)...
I also thought that the haynes manual had the wiring diagram for the vitara efi model in it?
Posted: Wed Aug 20, 2003 12:33 pm
by mike
georges wrote:the only wire I need to know is the oxygen sensor which runs from the computer directly to the exhaust manifold. What color is that wire?
Mines in at the auto leccy as we speak when I get it back I'll check for ya...
Posted: Wed Aug 20, 2003 6:25 pm
by georges
I think I'll have to take it to a sparky the birds nest is giving me a few more problems
Posted: Wed Aug 20, 2003 11:36 pm
by moose
ring Joe at 4PLAY OFFROAD !!!!
97614694
he has both manuals , & in the eastern burbs !!!!!!
Posted: Sat Aug 23, 2003 5:22 pm
by georges
Thanks for the advice moose, I went to see Joe and he was a wealth of information, well worth the trip so thanks again.
Posted: Sun Aug 24, 2003 8:16 pm
by mud4b
georges,sorry i havnt been able to get on the net,how did it go at the lecies?do you still need the wire colour?