Page 1 of 1
Brake Rotors from ebay
Posted: Sat Feb 04, 2006 9:33 am
by BigMav
Bar
Posted: Sat Feb 04, 2006 9:42 am
by blackmav
Pretty sure thats where I got mine from, also called Wodonga power steer and brake.
Only put them on yesterday, so don't really know other than they fit
Posted: Sat Feb 04, 2006 9:49 am
by BigMav
So you bought them directly from the store? How much if you don't mind me asking?
Appin this Sat
Posted: Sat Feb 04, 2006 9:53 am
by blackmav
Nup. Got them though ebay but when I contacted them I got them to through a set of pads in as well , all up was around $120. Bought them about six months ago and put them on yesterday
still got the email
Nick Macklan
E-mail Address(es):
wodpower@bigpond.com
try direct
Posted: Sat Feb 04, 2006 11:54 am
by Beastmavster
They're on there as a buy now item for $77
http://cgi.ebay.com.au/NISSAN-MQ-GQ-PAT ... dZViewItem
Wonder how many idiots will bid it up to $150
Re: Brake Rotors from ebay
Posted: Sat Feb 04, 2006 2:45 pm
by bogged
are they really that much cheaper than buying local so you can check the quality personally on the spot?
Re: Brake Rotors from ebay
Posted: Sat Feb 04, 2006 6:48 pm
by BigMav
bogged wrote:are they really that much cheaper than buying local so you can check the quality personally on the spot?
Thats why I'm asking if anyone has used them and what experiences they have had.
Re: Brake Rotors from ebay
Posted: Sat Feb 04, 2006 9:51 pm
by bogged
BigMav wrote:bogged wrote:are they really that much cheaper than buying local so you can check the quality personally on the spot?
Thats why I'm asking if anyone has used them and what experiences they have had.
doesnt mean the ones they send you will be the same as what they sent them thats what Im gettin at.
hey its your $.. go for it
Posted: Sat Feb 04, 2006 9:56 pm
by matthewK
i think they guy that own somervill wreakers here in vic was doing roaters i think specail at $39 a pop
really ebays good dont get me wrong but something this important that stops the 4by for a few extra dollor id be going to a reputable brack joint like abs , or even the auto shop and just pricing what they can do for you ???
Posted: Tue Feb 07, 2006 4:59 pm
by BigMav
ended up getting dba rotors at $89 a side, a lot more than i wanted to pay but the quality is there. Also got some bendix 4wd pads, hope they are as good as they are cracked up to be aswell. Will start the job tonight. Anyone have any tips to doing the job before I get started.
Posted: Tue Feb 07, 2006 5:19 pm
by matthewK
as long as ya got all tools needed should be right dont forget your clamp to
its good to put a clamp on before taking out brake to push the clyinder in a bit make it eiser to lift and pull out pads
i also found silverline to be fairly good:) my last set i just used crappy frodo ones just get me around