Page 1 of 1
Some new bits on my Paj!
Posted: Sat Feb 04, 2006 7:45 pm
by hudson44
Hey guys... Done a couple of things to my Paj and thought i might post them up.
Removed the 1" spring spacers from the rear about a month ago and fit 2" lifted springs. Had a brain wave and thought bugger it and put the spacers in as well. So i have 3" lift on the rear and front T-bars cranked and bump stops chopped. Still running standard shocks but all seems pretty good, and sits pretty high too!
Also bought myself a Uniden UH089 uhf from a mob in Perth. If you guys are looking for anything electrical try the guys
http://www.prestigecom.net.au/ Deffinately the cheapest going round, and recieved the goods the next day from Perth!!
Here's some pics of the CB...
cb
Posted: Sat Feb 04, 2006 10:36 pm
by klrevo
yeh bought mine through prestigecom aswell, they even do direct bank deposit!
crazy, and theyre prices are awesome too, hard to beat
dean
Posted: Sat Feb 04, 2006 11:03 pm
by -Scott-
No problems with the mic getting in the way? I had my mic in there, and was always hitting it with my knee. Next time the Paj went to a mechanic it came back with the clip broken.
My mic sits in the centre console now.
Scott
Posted: Sun Feb 05, 2006 10:13 am
by hudson44
NJ SWB wrote:No problems with the mic getting in the way? I had my mic in there, and was always hitting it with my knee. Next time the Paj went to a mechanic it came back with the clip broken.
My mic sits in the centre console now.
Scott
Yeah i only put it in yesterday, so i'm not sure yet. Seems to be ok but time will tell. Working on some pics of the lift and will post them asap!
lift
Posted: Sun Feb 05, 2006 3:41 pm
by klrevo
yeh pics of lift
dean
Posted: Sun Feb 05, 2006 3:51 pm
by Allan Mac
Hudson44,
Have a same model UHF & works well. One big problem though
. Noticed from your pics the position of the small stick, so presume an auto, so when you put in 4wdLL, stick rubs up hard against cable which runs to mic.. After awhile can loosen wires, so just be careful.
Cheers
Allan Mac
Posted: Sun Feb 05, 2006 8:42 pm
by hudson44
Thanks for the advise allan, but she's a manual. Went for a bit of a drive today and did'nt seem to bother me. Hey Klrevo... pics of lift are coming, just need to find time to remove the dinged up side steps before i post pics!!
Posted: Sat Feb 11, 2006 5:37 pm
by hudson44
Finally got round to getting rid of my sh*tty, dinged up side steps and took some poser pics of the new lift today.... so here they are!!
Posted: Sat Feb 11, 2006 5:40 pm
by hudson44
And one of the flash blue spring
paj
Posted: Sun Feb 12, 2006 7:07 pm
by klrevo
lookin good hudson
i dont see too many decent lwb jabbers, or any decent jabbers actually but youve done well mate
the springs remind me of when i put the lwb springs in the shorty, blue must be the go
dean
Posted: Sat Feb 18, 2006 12:21 pm
by hudson44
Put some Air Horns on her today that i scored off a wreck at work...damn they're loud!! Do air horns count as a mod???