Outer Limits 4x4 Board

Looking at the idea of putting individual brakes on an off road machine , ie not road legal . Running thro ideas . guys just put another master cyl in line but I would like push button .
There was a post a while back about some traction control guys were developing and selling . They were using some sort of truck boosters for the individual brakes . Does anyone know what they are or what they were off . Something like that could work for me .

Cheers

Chris

search for haultech traction control. those guys were the founders of the outers forum iirc

Use rear discs with an internal hand brake and set them up independently to each other on two levers.
Peter.

i used to have these on an old trial machine, that i owned in NZ.

we used clutch slave cylinders, in reverse.
IE in the "bleader" and out of the "in" hole. then set up the handles on the push-rods.
plumbed this in to the existing break lines after the T. with individual lines to each wheel.
you'll need a stop on the handles so that tthe push-rods dont come out, when you jump on the breaks.

this mod didn't affect the normal break operation. and woked a treat when you wanted to do donuts.


Mitch

I'm planning to do the same thing thanks moonman

so i just use the same clutch slave cylinders as in the zook