Page 1 of 1
how big
Posted: Wed Feb 08, 2006 8:22 am
by mugsy
G'day all , not sure if this has been asked before, just about to replace the boots on my 2000 LUX. just wondering how big l can go without them rubbing. the IFS is wound all the way up and it has 31's on it now and they clear everything comfortably. will go BF M/T or WRANGLER MTR's depending on price.
cheers.
Posted: Wed Feb 08, 2006 9:33 am
by greenhilux
the biggest you will be able to go is probably 32x11.5's. they still might rub.
Posted: Wed Feb 08, 2006 10:38 am
by daveo
a bloke on here, username hemp, was running tsl 34 9.5s with no probs and just a 2inch sus lift. i run 31 10.5s and no lift and they rub the rear of the wheel arch but i need to crank my torsion bars.
Posted: Thu Feb 09, 2006 8:00 am
by GBC
SR5's have less clearance with all the crap flares etc and will need some grinding work. I have an'03 twin cab with 2"blocks and almost 2" susp lift. It runs 31's for on road, and 285/75r16's off road.
Posted: Thu Feb 09, 2006 8:34 am
by greenhilux
i have an sr5 aswell, clearance is exactly the same. I had 2'' body 1 1/2 '' suspension and i ran 33x12.5 claws.