Page 1 of 1
60 series lift
Posted: Thu Feb 09, 2006 4:54 pm
by picko
Hi guys, im thinking off buying 1987 model Landcruiser 60 series!, manual and turbo diesel!
Im going to fit 35's and was wondering what height can i go? I was thinking atleast 4 inch lift but would like 5 or more!
By the way im in NSW!
thanks guys!
Posted: Thu Feb 09, 2006 5:12 pm
by Tiny
to get big lift you go SOA but IMO they are to tippy, I would go 2" susp and 2" body and a set of 35s and be done with it
Posted: Sun Jun 11, 2006 2:40 pm
by seaeagle
Tiny wrote:to get big lift you go SOA but IMO they are to tippy, I would go 2" susp and 2" body and a set of 35s and be done with it
will they still get the same clearance?
i just got my first 62 and got hooked up on the diff and the u-bolt plate under the leafs, to many times, the other cars got through , (hilux Patrol)
so would it be cheaper to SOA or lift body and susp?
in saying that.....2" susp lift wont change the height of the diff id think
Posted: Sun Jun 11, 2006 4:56 pm
by dibbz
Pick a better line you might not get hooked up, soa will not make your diff any higher, tyres will, you don't need soa for 35's, if you wanted 37's perhaps.
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=51966
60 lift
Posted: Mon Jun 19, 2006 8:36 pm
by scotyz
Ive got 50mm body lift 50mm spring lift and 35s ,i also have three inch offset rims,that makes it 6 inches higher and 6 inches wider and it works perfectly .
www.coffs4wdclub.com
Posted: Mon Jun 19, 2006 10:00 pm
by Ruffy