Page 1 of 1

Factory GU winch

Posted: Fri Feb 10, 2006 6:24 pm
by bigpilchard
Hi fellas as in my other post going to put a factory 8000lbs winch on the patrol anyone know what brand nissan uses?and are they any good?

Posted: Fri Feb 10, 2006 6:25 pm
by Tiny
use ARB bar so I presume WARN

Posted: Fri Feb 10, 2006 7:23 pm
by Mick.
I recenty put a genuine nissan winch bar on my GQ and it come with instructions for fitting a warn winch so i'm guessing they use warn winches still. ;)

Cheers Mick.

Re: Factory GU winch

Posted: Fri Feb 10, 2006 7:43 pm
by OnPatrol
bigpilchard wrote:Hi fellas as in my other post going to put a factory 8000lbs winch on the patrol anyone know what brand nissan uses?and are they any good?
I presume it's a low mount winch if you're using a factory bar. If that's the case then why not use a 9000lb winch. It's a heavy vehicle, so go for a bigger winch if you can.

Re: Factory GU winch

Posted: Fri Feb 10, 2006 7:46 pm
by Tiny
OnPatrol wrote:
bigpilchard wrote:Hi fellas as in my other post going to put a factory 8000lbs winch on the patrol anyone know what brand nissan uses?and are they any good?
I presume it's a low mount winch if you're using a factory bar. If that's the case then why not use a 9000lb winch. It's a heavy vehicle, so go for a bigger winch if you can.
I am under the impression they onlu suit the 8000lbs unless you get a genuine arb..........something like that anyway

Posted: Fri Feb 10, 2006 7:50 pm
by RoldIT
Nissan GU factory option winch is a Warn XD9000. I am unaware of any "8000lb" option.

Their GU winch bars will fit upto and including a Warn HS9500 but no more.

9.5XP are too long to fit between the chassis rails, as are M10000 and above.

You can cut the winch frame out and weld it back in offset to suit a M10000 (as I have done) but that obviously requires mods to your new bar, etc ...

Re: Factory GU winch

Posted: Fri Feb 10, 2006 8:11 pm
by Mick.
Tiny wrote:
OnPatrol wrote:
bigpilchard wrote:Hi fellas as in my other post going to put a factory 8000lbs winch on the patrol anyone know what brand nissan uses?and are they any good?
I presume it's a low mount winch if you're using a factory bar. If that's the case then why not use a 9000lb winch. It's a heavy vehicle, so go for a bigger winch if you can.
I am under the impression they onlu suit the 8000lbs unless you get a genuine arb..........something like that anyway
I was told by a nissan parts dealer that all nissan genuine bullbars are made my ARB. The reason being that not all bars from overseas would pass our ADR laws so it works out easier and cheaper to get ARB to make them instead of importing them.

Cheers Mick.

Posted: Fri Feb 10, 2006 8:27 pm
by roly
yes

ARB make the bullbars for Nissan AND Toyota AND ....

the factory GU bar is poo compared to the ARB Deluxe Winch bar

ON GU's i have had

TJM T15 Steel WInch bar - flimsy and weak
NISSAN Steel Winch bar - good except limited winch fitment
ARB Deluxe Steel Winchbar - the best hands down