Outer Limits 4x4 Board

Just got some seatbelts outta a 2002 VX commodore, when they came out, they retracted back and wont come out, is there a trick to getting them back out?????.
Cheers
Hoppy

Check moving them around. Remember that the seatbelts lock themselves at certain angles.

Will

try getting the thing held in the same angles as they were installed, them try getting them out

remember that they must be held in the same orientation as when intalled or like when your car is on a hill, they will lock up.
Peter.

wow, multi post

i was first, but you used bigger words.

Heres a tip make sure there at the right angle

are you sure about that?

I dont know about anyone else...But I would make sure they were on the right angle myself

orientation sounds more techy

Also wind them in a bit more to allow the ratchet to disengage once the angle is correct
J Top

Try and tip them upside down, or sideways, usually helps

jav wrote:i was first, but you used bigger words.

Are you sure you were first???

Will

try parallel to the ground first. find a strong bench top with a square edge. hold it against the side of the edge so that it's straight and tap it downwards. it'll free up pretty quick and rachet back in.

Awesome guys, got them moving this arvo.
Cheers
Hoppy