Outer Limits 4x4 Board

ive been told and by a mechanic that if i swap the inner axles that they fit straght in is this tru as ive also heard that all u need to do is grind a littile bit off the flat bit in the housing . pls tell me as i killed a CV at beerwah on thre w/end and have 2 75 CV's given to me and if it works i have saved acouple of hundred i dare say.

1989 and older 75 series CV should fit right in. Post 1990 75 series CV have a ridge along the bell part. When I tried to fit this into an older 40 series diff housing, I found the CV would bind anywhere past 30-35 degrees.

Post 1990 CV is the third one from the left. Hilux CV looks identical to the second one from the left:



Dave

kewl the 75 one i have is te 2nd from the left i thivk what are saying is that this will be the one that will fit . cause the last 2 look nuffing like the 75 one i have or the hilux ones. am i rite pls tell me if im not.

thanks for ur response
jamie

Yup, it will fit straight in.

Dave

thanks dave

Get yourself some Haultecks (PM Ruff) and wheel with confidence ( and keep the 75's as back ups just in case)

wish i could afford them . the 75,s are getting used cause there there and they didnt cost. when i get lockers , crwler bx and hi steer the haultechs are happening at the same time , i think ill be lookn bout a $ 10,000 spend next as im building a tray and cage as well. but haultechs would be nice.

yeah ot worked only took 2 wacks with a lump off billet alum and a lump hammer . and slotted straght in.