Outer Limits 4x4 Board

THINKING CAPS ON.....anyone know what vehicle i might find this type of bolt on type hub on. the picture has the disk cut off it. its a 4 bolt configuration with a large retaining nut underneath in the centre. it obviously has extra stuff welded to in now

trailer wheel hub ?

Or off an old piece of farm machinery. Looks like a very solid swing away

4 bolt sounds like small jap car. Other than that the sky's the limit on possibilities.

If my old man doesnt know what something is off he always says that it is off an aeroplane....

and in this case I think he's right! -Because it certainly isnt on an aeroplane

Beastmavster wrote:4 bolt sounds like small jap car. Other than that the sky's the limit on possibilities.

Escorts and early 4 cylinder Toranas also had 4 bolts - but given that you're not likely to find many of those any more, "small jap car" is probably a good summary.

Go have a dig around a wrecker's yard - you should find something you like.

Cheers,

Scott

That looks just like a rear hub from a drum braked Corolla circa 1989-1996.

mkpatrol wrote:That looks just like a rear hub from a drum braked Corolla circa 1989-1996.

Yeh, tis indeed.

The old 2 piece Gemini front ones work well

guzzla wrote:THINKING CAPS ON.....anyone know what vehicle i might find this type of bolt on type hub on. the picture has the disk cut off it. its a 4 bolt configuration with a large retaining nut underneath in the centre. it obviously has extra stuff welded to in now

could be just a custom made bit.......whatever it is looks good

Or it could be one of these http://www.trailerparts.net.au/shop/sto ... egoryID=CA

Scroll down near the bottom.

Thats the ticket. A hub centre, without the flange. Complete with bearings for under $40, how could you lose. Its exactly what I have on mine, except mine was turned up to suit. I would guess these have been asked for so many times, for spare wheel carriers, they have decided to specifically make them. Finally, someone who sees a need, and caters for it.

That looks like an early jeep jeeroke tail light so I reckon you would find it on one of those.

TRobbo wrote:That looks like an early jeep jeeroke tail light so I reckon you would find it on one of those.

I thing you will find it is an 80s

i think it is red
or maybe black

to MKPATROL and GRIBBLE,

thankyou muchly. went toi pick n payless this morning walked sr8 up to the corolla section and there it was.

will be modding this for a rear wheel carrier an since there is a current subject on this i will post pics there.

cheers all.

guzzla wrote:to MKPATROL and GRIBBLE,

thankyou muchly. went toi pick n payless this morning walked sr8 up to the corolla section and there it was.

will be modding this for a rear wheel carrier an since there is a current subject on this i will post pics there.

cheers all.

No probs, glad to be of some assistance

guzzla wrote:to MKPATROL and GRIBBLE,

thankyou muchly. went toi pick n payless this morning walked sr8 up to the corolla section and there it was.

will be modding this for a rear wheel carrier an since there is a current subject on this i will post pics there.

cheers all.

My (our) pleasure.

guzzla wrote:to MKPATROL and GRIBBLE,

thankyou muchly. went toi pick n payless this morning walked sr8 up to the corolla section and there it was.

will be modding this for a rear wheel carrier an since there is a current subject on this i will post pics there.

cheers all.

How many $$$ are we talking. I have to redo mine as i cant get the bearings for it anymore. Its very old school trailer bearings.

Cheers

$20 each. fully complete unit ready to install. chech out pics in the rear wheel carrier topic in this section.