a quick look over the vehicle (wife's been driving it for a while) and I noticed that the condensor fan was not turning (with the compressor going). A quick look, and I immeadiately thought the fan was dead. A quick call to the mitsu dealer. Couldn't get just the fan motor so it had to be the whole assembly. When the dealewr said the price ($700+) i didn't have to say anything, his reply to me was, "well I suppose your not going to replace it with a genuine part then". Drove past supercheap to check out the fans, around $60 but it would require some metalwork to fit.
Got home, decided to flush some of the dirt out of it, and hey presto it worked. The wife got a valentine day pressy after all (not having to pay for a new fan).
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
condenser fan
Moderator: -Scott-
condenser fan
NJ 2.8ITD
2 inch lift/31x10.5
Rear shelves/second battery/Engel
Manual GPS (wife reading map)
2 inch lift/31x10.5
Rear shelves/second battery/Engel
Manual GPS (wife reading map)
The a/c fan on these do not automatically turn on with the a/c.
They are wired to a pressure switch in the a/c circuit and only get the signal to run if the pressure gets to a certain point.
You can have this easily rewired to run as soon as the a/c clutch cycles.
I removed my a/c system and mounted the fan to a bracket I made up and still had room next to it for another fan (after the condenser was removed).
The other one was a DC10 (Davies Craig) which is physically the same size as the standard fan and it cost $99 at Supacheap.
Both fans are wired to switch on the console for those steep hill climbs on extra hot days. Works very well....................
They are wired to a pressure switch in the a/c circuit and only get the signal to run if the pressure gets to a certain point.
You can have this easily rewired to run as soon as the a/c clutch cycles.
I removed my a/c system and mounted the fan to a bracket I made up and still had room next to it for another fan (after the condenser was removed).
The other one was a DC10 (Davies Craig) which is physically the same size as the standard fan and it cost $99 at Supacheap.
Both fans are wired to switch on the console for those steep hill climbs on extra hot days. Works very well....................
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 0 guests