After a rather wet experiance my hella 4000's had water in them.
I know they do it every time, but has anyone come up with
a way of sealing them.
At a guess i think sikafleks/selastic and breathers are a start?.
Any taker's
Cheers Ian.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Waterproofing rallie 4000's
Moderator: -Scott-
Waterproofing rallie 4000's
GQ LWB TD42 Turbo,(ps.water does not compress.)
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
I have had water up the the windscrene on my Gu and not got water in my 4000's.
I would check how well the front ring is mated to the body of the light. The other potential problem spot could be the dodgy plug at the rear. Not sure what you could do with that.
I would check how well the front ring is mated to the body of the light. The other potential problem spot could be the dodgy plug at the rear. Not sure what you could do with that.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
hi were they turned on when this happened if so the instant cooling of the light causes them to suck water in rather them just leaking ipf and maybe a couple of others make a special light which are submersible when on .otherwise id recomend maybe taking them to a dealer and seeing about an exchange. as top of the line hella they shouldnt leak under normal conditions if they wernt switched on . hope this helps a bit muds
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
Sounds strange though, as if the ring-glass-housing aren't matched /machined properly. As I said before, mine have never leaked doing large bog holes nd deep river crossings. But the headlights on the GU have leaked and have been replaced under warrenty.
I have been consideringputting breathers on the headlights but can't see the point if waters getting in when they aren't turned on.
I would try getting them swapped over, if they're not too old.
Failing that, try using gasket sealent around the ring and glass.
I have been consideringputting breathers on the headlights but can't see the point if waters getting in when they aren't turned on.
I would try getting them swapped over, if they're not too old.
Failing that, try using gasket sealent around the ring and glass.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Who is online
Users browsing this forum: No registered users and 0 guests