Page 1 of 1
Paj Specs
Posted: Tue Feb 21, 2006 10:48 am
by klrevo
just been muckin round, doin the springs and repainting my rims this morning and measured him up, just thoguth it would be cool to get an idea of the specs on everyones jabbers,
Wheelbase: 240cm / 96"
Width: 186cm / 74.4"
Height: 186cm / 74.4"
i have a square paj
the 33" x 12.5" tyres have helped give some extra width and he now stands really well, and these figures ar ewith the GQ rear springs out, and the LWB paj coils in.
Posted: Tue Feb 21, 2006 3:47 pm
by Miyagi
man, you've got too much time on your hands.
specs
Posted: Tue Feb 21, 2006 4:23 pm
by klrevo
its called uni mate
im there now, finally, 7-9pm is all i have today
dean
Posted: Tue Feb 21, 2006 9:48 pm
by j-top paj
how bout height from diff center, transfer, front cross member???
i got mine written down somewhere from when i did the lift but cant find em atm..
Posted: Wed Feb 22, 2006 3:08 pm
by Spimon_NH
My Paj is higher than your Paj
202cm
Had to measure after the body lift. Almost had a slight mishap at a carpark.
I still fit in most carparks (2.1m). A few that have barriers at 2.0m tho.
Does anyone have the height of a stock NH LWB Pajero? I want to enter Son Of Trials and need to make sure I have less than 4" lift. I'm pretty sure I'm on about 3", but just need to make sure.
Posted: Wed Feb 22, 2006 4:23 pm
by GREGGO
Do we go to the height of the roof of the 4x4, or the roof racks, or the lights on the roof racks?
Posted: Wed Feb 22, 2006 6:42 pm
by hudson44
How bout some pics after the body lift spimon...
Posted: Thu Feb 23, 2006 6:43 pm
by Spimon_NH
I'll get some pics happening tomorrow hopefully. Just finished lifting the bumper today, but it's kinda dark now.
Posted: Sat Feb 25, 2006 7:28 pm
by 4wd26
Height of gen1 swb with 1996 coils and 255/85/16 tyres 1.95m
clearance rear diff 275mm
Auto transfer gaurd 310mm
front x-member 310mm
with the shorty I can keep the alloy sidesteps and still not scrape
Posted: Tue Feb 28, 2006 1:32 pm
by Spimon_NH
Finally took photos. Obviously haven't lifted the bullbar yet. Now the 31's look small
Posted: Sun Mar 05, 2006 8:53 pm
by eddy 76
looks great was going to do mine this weekend before motor blew up now i may have to wait a little while.
cheers eddy
paj
Posted: Tue Mar 07, 2006 8:04 pm
by klrevo
Rear diff clearance:
9.5" or 24cm
Front diff clearance:
12.5" or 32cm
dean
Posted: Tue Mar 07, 2006 8:42 pm
by hudson44
Mines 196cm tall, running 32" muddies.... in too nicer clothes to crawl under her and check diff clearances!
paj
Posted: Tue Mar 07, 2006 8:57 pm
by klrevo
well mines lower running 33"s, all you going on about how HIGH
they are, id so much rather be closer to the ground, the paj already seems to find the off camber angles way too easily for my liking
dean
Posted: Wed Mar 08, 2006 6:34 pm
by 4wd26
Klrevo,
are you sure about the rear diff clearence?
standard around 235mm (gen1)
I would have thought that gen2 would also be around that height.
No wonder gen2 owners need/ want 33" tyres.
My gen1 is 275mm rear diff. Thats the lowest part with 255/85/16, and I'm loving the clearance.
Cheers
paj
Posted: Wed Mar 08, 2006 9:13 pm
by klrevo
yeh mate pretty sure, got out there with the measureing tape yesterday i think it was...
dean